Skip to main content
Help

Original post by: Jeremy ,

Text:

I just used a heating gun to remove the screen, it would have been easier if I wanted to replace the lcd and digitizer, but the lcd was fine on mine.  with the heating gun and plenty of credit card to shove in between, it came off fairly easily, just take your time, dont force anything.   NOTE:  be careful at the bottom, that is where all the ribbons are, if your digitizer is going to get replaced anyway, it wont matter if you cut some of them, just dont apply too much heat, or it will melt the important ones underneath.  Now, I need to figure out what type of method I have to use to reapply all the glue.

Stato:

open