Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Aiuto

Versione corrente di: lsmcmenemy ,

Titolo:

Gray lines on LCD after screen replacement, now iPad wont power

Testo:

I cracked the screen of my 4th gen iPad and decided to attempt the repair myself. After a good 2 hours of painstakingly removing the shards of screen I finally connected the replacement and decided to test it before completely reassembling. When I first powered on there was grey lines running across the screen so I powered off and rechecked the digitizer and LCD connections - all looked fine. Powered on again, same thing happened. Disconnected LCD and digitizer a second tometime and tried again. Now my iPad wont power on at all. I've tried a forced reset by holding down the power and home buttons, nothing. It seems totally dead. Tried to restore from itunes but due to the new OSiOS 7 upgrade, I need to first disable Find iPhone buton the iPad - can't get intoin to the iPad to do so. iTunes recognizedsat least recognizes the iPad and find iPhone says that my battery is still at 57% so its definitely not an issue with charge. Not sure what the exact problem is and would really appreciate some help on what to try next. I'm guessing I accidentally damaged the LCD and I will order a replacement but given that the screen lit up to begin with and is now unresponsive I fear I have caused some other damage? Thanks so much!!in advance for your help.
I cracked the screen of my 4th gen iPad and decided to attempt the repair myself. After a good 2 hours of painstakingly removing the shards of screen I finally connected the replacement and decided to test it before completely reassembling. When I first powered on there was grey lines running across the screen so I powered off and rechecked the digitizer and LCD connections - all looked fine. Powered on again, same thing happened. Disconnected LCD and digitizer a second tometime and tried again. Now my iPad wont power on at all. I've tried a forced reset by holding down the power and home buttons, nothing. It seems totally dead. Tried to restore from itunes but due to the new OSiOS 7 upgrade, I need to first disable Find iPhone buton the iPad - can't get intoin to the iPad to do so. iTunes recognizedsat least recognizes the iPad and find iPhone says that my battery is still at 57% so its definitely not an issue with charge. Not sure what the exact problem is and would really appreciate some help on what to try next. I'm guessing I accidentally damaged the LCD and I will order a replacement but given that the screen lit up to begin with and is now unresponsive I fear I have caused some other damage? Thanks so much!!in advance for your help.

Dispositivo:

iPad 4 Wi-Fi

Stato:

open

Modifica di: lsmcmenemy ,

Titolo:

Gray lines on LCD after screen replacement, now iPad wont power

Testo:

I cracked the screen of my 4th gen iPad and decided to attempt the repair myself. After a good 2 hours of painstakingly removing the shards of screen I finally connected the replacement and decided to test it before completely reassembling. When I first powered on there was grey lines running across the screen so I powered off and rechecked the digitizer and LCD connections - all looked fine. Powered on again, same thing happened. Disconnected LCD and digitizer a second timetome and tried again. Now my iPad wont power on at all. I've tried a forced reset by holding down the power and home buttons, nothing. It seems totally dead. Tried to restore from itunes but due to the new OS upgrade, I need to first disable Find iPhone but can't get into the iPad to do so. iTunes recognizeds the iPad and find iPhone says that my battery is at 57% so its definitely not an issue with charge. Not sure what the problem is and would really appreciate some help on what to try next. Would really appreciate some helpThanks so much!!
I cracked the screen of my 4th gen iPad and decided to attempt the repair myself. After a good 2 hours of painstakingly removing the shards of screen I finally connected the replacement and decided to test it before completely reassembling. When I first powered on there was grey lines running across the screen so I powered off and rechecked the digitizer and LCD connections - all looked fine. Powered on again, same thing happened. Disconnected LCD and digitizer a second timetome and tried again. Now my iPad wont power on at all. I've tried a forced reset by holding down the power and home buttons, nothing. It seems totally dead. Tried to restore from itunes but due to the new OS upgrade, I need to first disable Find iPhone but can't get into the iPad to do so. iTunes recognizeds the iPad and find iPhone says that my battery is at 57% so its definitely not an issue with charge. Not sure what the problem is and would really appreciate some help on what to try next. Would really appreciate some helpThanks so much!!

Dispositivo:

iPad 4 Wi-Fi

Stato:

open

Modifica di: lsmcmenemy ,

Titolo:

Gray lines on LCD after screen replacement, now iPad wont power

Testo:

I cracked the screen of my 4th gen iPad and decided to attempt the repair myself. After a good 2 hours of painstakingly removing the shards of screen I finally connected the replacement and decided to test it before completely reassembling. When I first powered on there was grey lines running across the screen so I powered off and rechecked the digitizer and LCD connections - all looked fine. Powered on again, same thing happened. Disconnected LCD and digitizer a second tometime and tried again. Now my iPad wont power on at all. I've tried a forced reset by holding down the power and home buttons, nothing. It seems totally dead. Tried to restore from itunes but due to the new OS upgrade, I need to disable Find iPhone but can't get into the iPad to do so. Not sure what the problem is and would really appreciate some help on what to try next. Would really appreciate some help
I cracked the screen of my 4th gen iPad and decided to attempt the repair myself. After a good 2 hours of painstakingly removing the shards of screen I finally connected the replacement and decided to test it before completely reassembling. When I first powered on there was grey lines running across the screen so I powered off and rechecked the digitizer and LCD connections - all looked fine. Powered on again, same thing happened. Disconnected LCD and digitizer a second tometime and tried again. Now my iPad wont power on at all. I've tried a forced reset by holding down the power and home buttons, nothing. It seems totally dead. Tried to restore from itunes but due to the new OS upgrade, I need to disable Find iPhone but can't get into the iPad to do so. Not sure what the problem is and would really appreciate some help on what to try next. Would really appreciate some help

Dispositivo:

iPad 4 Wi-Fi

Stato:

open

Modifica di: lsmcmenemy ,

Titolo:

Gray lines on LCD after screen replacement, now iPad wont power

Testo:

I cracked the screen of my 4th gen iPad and decided to attempt the repair myself. After a good 2 hours of painstakingly removing the shards of screen I finally connected the replacement and testeddecided to test it before completely reassembling. When I first powered on there was grey lines running across the screen so I powered off and rechecked the digitizer and LCD connections - all looked fine. Powered on again, same thing happened. Disconnected LCD and digitizer a second tome and tried again. Now my iPad wont power on at all. I've tried a forced reset by holding down the power and home buttons, nothing. It seems totally dead. Tried to restore from itunes but due to the new OS upgrade, I need to disable Find iPhone but can't get into the iPad to do so. Not sure what the problem is and would really appreciate some help on what to try next. Would really appreciate some help
I cracked the screen of my 4th gen iPad and decided to attempt the repair myself. After a good 2 hours of painstakingly removing the shards of screen I finally connected the replacement and testeddecided to test it before completely reassembling. When I first powered on there was grey lines running across the screen so I powered off and rechecked the digitizer and LCD connections - all looked fine. Powered on again, same thing happened. Disconnected LCD and digitizer a second tome and tried again. Now my iPad wont power on at all. I've tried a forced reset by holding down the power and home buttons, nothing. It seems totally dead. Tried to restore from itunes but due to the new OS upgrade, I need to disable Find iPhone but can't get into the iPad to do so. Not sure what the problem is and would really appreciate some help on what to try next. Would really appreciate some help

Dispositivo:

iPad 4 Wi-Fi

Stato:

open

Post originale di: lsmcmenemy ,

Titolo:

Gray lines on LCD after screen replacement, now iPad wont power

Testo:

I cracked the screen of my 4th gen iPad and decided to attempt the repair myself. After a good 2 hours of painstakingly removing the shards of screen I finally connected the replacement and tested it before completely reassembling. When I first powered on there was grey lines running across the screen so I powered off and rechecked the digitizer and LCD connections - all looked fine. Powered on again, same thing happened. Disconnected LCD and digitizer a second tome and tried again. Now my iPad wont power on at all. I've tried a forced reset by holding down the power and home buttons, nothing. It seems totally dead. Tried to restore from itunes but due to the new OS upgrade, I need to disable Find iPhone but can't get into the iPad to do so. Not sure what the problem is and would really appreciate some help on what to try next. Would really appreciate some help

Dispositivo:

iPad 4 Wi-Fi

Stato:

open