Salta al contenuto principale
Aiuto

Versione corrente di: Leslie Wiggins ,

Titolo:

-Source for diffuser behind LCD screen
+Source for diffuser behind LCD panel

Testo:

I recently replaced the LCD screen of a friends Macbook Air A1370, but in doing so I scorched the white plastic diffuser immediately behind the LCD panel.  I used an SMD heat gun so the hot air was concentrated in the right area but I must have hovered over that area too long.  There are 3 sheets between the LCD and back light but only the topmost has been affected.  The wrinkle is about 2 inches across the top so it prevents the LCD panel from laying flat after reassembly.

Does anyone have a source for either this top diffuser or the set.

Thanks

Leslie

Dispositivo:

MacBook Air 11" Late 2010

Stato:

open

Modifica di: Leslie Wiggins ,

Titolo:

-Source for filters behind LCD screen
+Source for diffuser behind LCD screen

Testo:

I recently replaced the LCD screen of a friends Macbook Air A1370, but in doing so I scorched the white plastic diffuser immediately behind the LCD panel.  I used an SMD heat gun so the hot air was concentrated in the right area but I must have hovered over that area too long.  There are 3 sheets between the LCD and back light but only the topmost has been affected.  The wrinkle is about 2 inches across the top so it prevents the LCD panel from laying flat after reassembly.

Does anyone have a source for either this top diffuser or the set.

Thanks

Leslie

Dispositivo:

MacBook Air 11" Late 2010

Stato:

open

Modifica di: Leslie Wiggins ,

Titolo:

Source for filters behind LCD screen

Testo:

-I recently replaced the LCD screen of a friends Macbook Air A1370, but in doing so I scorched the white plastic sheet (light filter) immediately behind the LCD panel. I used an SMD heat gun so the hot air was concentrated in the right area but I must have hovered over that area too long. There are 3 sheets between the LCD and back light but only the topmost has been affected. The wrinkle is about 2 inches across the top so it prevents the LCD panel from laying flat after reassembly.
+I recently replaced the LCD screen of a friends Macbook Air A1370, but in doing so I scorched the white plastic diffuser immediately behind the LCD panel. I used an SMD heat gun so the hot air was concentrated in the right area but I must have hovered over that area too long. There are 3 sheets between the LCD and back light but only the topmost has been affected. The wrinkle is about 2 inches across the top so it prevents the LCD panel from laying flat after reassembly.
-Does anyone have a source for either this top sheet or the set.
+Does anyone have a source for either this top diffuser or the set.
Thanks
Leslie

Dispositivo:

MacBook Air 11" Late 2010

Stato:

open

Post originale di: Leslie Wiggins ,

Titolo:

Source for filters behind LCD screen

Testo:

I recently replaced the LCD screen of a friends Macbook Air A1370, but in doing so I scorched the white plastic sheet (light filter) immediately behind the LCD panel.  I used an SMD heat gun so the hot air was concentrated in the right area but I must have hovered over that area too long.  There are 3 sheets between the LCD and back light but only the topmost has been affected.  The wrinkle is about 2 inches across the top so it prevents the LCD panel from laying flat after reassembly.

Does anyone have a source for either this top sheet or the set.

Thanks

Leslie

Dispositivo:

MacBook Air 11" Late 2010

Stato:

open