Salta al contenuto principale
Aiuto

Versione corrente di: Kris Rodriguez (dettagli voto) ,

Titolo:

Connecting powercord between iMac and APC UPS 350?

Testo:

The iMac power cord at one end is connected to the back of the device at bottom. This is a female-type 3 terminal IEC. The other end of cord (male-type) goes to the power outlet mains or the UPS. Recent UPS models by APC have terminals that can take this male-type connection. This means that the UPS models have female-type terminal similar like a power mains.

I have a 5 year old APC UPS which does not have such a  'powermain' type of connection. The outlets on my UPS are same like that found at the bottom back of the iMac - 3 slits. These type of UPS normally used for power backup for PC's. Normally the CPU and Monitor of a PC will have these type of IEC cables.

For example image, you can see the APS model:

http://www.apc.com/resource/include/techspec_index.cfm?base_sku=bk350ei

This is not exactly the model that I have, but the image gives an idea as to what type of outlets are found on my UPS.

My question: How do i connect the iMac to the UPS? Are converter IEC cables available which can be connected between the power cord of iMac and the power outlet of UPS?

Dispositivo:

iMac Intel 21.5" EMC 2544

Stato:

-open
+closed

Risposta Accettata:

120339

Modifica di: oldturkey03 (dettagli voto) ,

Titolo:

Connecting powercord between iMac and APC UPS 350?

Testo:

The iMac power cord at one end is connected to the back of the device at bottom. This is a female-type 3 terminal IEC. The other end of cord (male-type) goes to the power outlet mains or the UPS. Recent UPS models by APC have terminals that can take this male-type connection. This means that the UPS models have female-type terminal similar like a power mains.

I have a 5 year old APC UPS which does not have such a  'powermain' type of connection. The outlets on my UPS are same like that found at the bottom back of the iMac - 3 slits. These type of UPS normally used for power backup for PC's. Normally the CPU and Monitor of a PC will have these type of IEC cables.

For example image, you can see the APS model:

http://www.apc.com/resource/include/techspec_index.cfm?base_sku=bk350ei

This is not exactly the model that I have, but the image gives an idea as to what type of outlets are found on my UPS.

My question: How do i connect the iMac to the UPS? Are converter IEC cables available which can be connected between the power cord of iMac and the power outlet of UPS?

Dispositivo:

iMac Intel 21.5" EMC 2544

Stato:

open

Risposta Accettata:

+120339

Modifica di: Andrew Optimus Goldheart ,

Titolo:

Connecting powercord between iMac and APC UPS 350?

Testo:

The iMac power cord at one end is connected to the back of the device at bottom. This is a female-type 3 terminal IEC. The other end of cord (male-type) goes to the power outlet mains or the UPS. Recent UPS models by APC have terminals that can take this male-type connection. This means that the UPS models have female-type terminal similar like a power mains.

I have a 5 year old APC UPS which does not have such a  'powermain' type of connection. The outlets on my UPS are same like that found at the bottom back of the iMac - 3 slits. These type of UPS normally used for power backup for PC's. Normally the CPU and Monitor of a PC will have these type of IEC cables.

For example image, you can see the APS model:

http://www.apc.com/resource/include/techspec_index.cfm?base_sku=bk350ei

This is not exactly the model that I have, but the image gives an idea as to what type of outlets are found on my UPS.

My question: How do i connect the iMac to the UPS? Are converter IEC cables available which can be connected between the power cord of iMac and the power outlet of UPS?

Dispositivo:

-iMac Intel 21" (late 2012 without DVD drive)
+iMac Intel 21.5" EMC 2544

Stato:

open

Post originale di: anup j rao ,

Titolo:

Connecting powercord between iMac and APC UPS 350?

Testo:

The iMac power cord at one end is connected to the back of the device at bottom. This is a female-type 3 terminal IEC. The other end of cord (male-type) goes to the power outlet mains or the UPS. Recent UPS models by APC have terminals that can take this male-type connection. This means that the UPS models have female-type terminal similar like a power mains.

I have a 5 year old APC UPS which does not have such a  'powermain' type of connection. The outlets on my UPS are same like that found at the bottom back of the iMac - 3 slits. These type of UPS normally used for power backup for PC's. Normally the CPU and Monitor of a PC will have these type of IEC cables.

For example image, you can see the APS model:

http://www.apc.com/resource/include/techspec_index.cfm?base_sku=bk350ei

This is not exactly the model that I have, but the image gives an idea as to what type of outlets are found on my UPS.

My question: How do i connect the iMac to the UPS? Are converter IEC cables available which can be connected between the power cord of iMac and the power outlet of UPS?

Dispositivo:

iMac Intel 21" (late 2012 without DVD drive)

Stato:

open