Salta al contenuto principale
Aiuto

Versione corrente di: mayer (dettagli voto) ,

Titolo:

Ripped pad off when removing battery, iPod still good?

Testo:

So I was trying to desolder the battery terminals and on the very last one, it pulled the pad off the board. Is the board still good? Can I just take the pad off the battery end and reapply it?

== Update ==

[image|213546|align=left]

I have one that is missing in the middle and the other on the left. I was reading those links and it says something about scraping the green off. Do i scrape the dot off too? Would I just apply solder in the empty spot and tin the down side of the battery connections?

Dispositivo:

iPod Touch 2nd Generation

Stato:

open

Risposta Accettata:

111868

Modifica di: Cody ,

Titolo:

Ripped pad off when removing battery, iPod still good?

Testo:

So I was trying to desolder the battery terminals and on the very last one, it pulled the pad off the board. Is the board still good? Can I just take the pad off the battery end and reapply it?
 
== UpdateUpdate ==
== UpdateUpdate ==
 
[image|213546|align=left]
 
I have one that is missing in the middle and the other on the left. I was reading those links and it says something about scraping the green off. Do i scrape the dot off too? Would I just apply solder in the empty spot and tin the down side of the battery connections?

Dispositivo:

iPod Touch 2nd Generation

Stato:

open

Risposta Accettata:

111868

Modifica di: Cody ,

Titolo:

Ripped pad off when removing battery, iPod still good?

Testo:

So I was trying to desolder the battery terminals and on the very last one, it pulled the pad off the board. Is the board still good? Can I just take the pad off the battery end and reapply it?
== Update ==
 
 
 
 
[image|213546]
 
 
 
== Update ==
 
[image|213546|align=left]
 
I have one that is missing in the middle and the other on the left. I was reading those links and it says something about scraping the green off. Do i scrape the dot off too? Would I just apply solder in the empty spot and tin the down side of the battery connections?

Dispositivo:

iPod Touch 2nd Generation

Stato:

open

Risposta Accettata:

111868

Modifica di: Cody ,

Titolo:

Ripped pad off when removing battery, iPod still good?

Testo:

So I was trying to desolder the battery terminals and on the very last one, it pulled the pad off the board. Is the board still good? Can I just take the pad off the battery end and reapply it?
== Update ==
 
 
 
 
[image|213546]
 
 
 
 
 
I have one that is missing in the middle and the other on the left. I was reading those links and it says something about scraping the green off. Do i scrape the dot off too? Would I just apply solder in the empty spot and tin the down side of the battery connections?

Dispositivo:

iPod Touch 2nd Generation

Stato:

open

Post originale di: Cody ,

Titolo:

Ripped pad off when removing battery, iPod still good?

Testo:

So I was trying to desolder the battery terminals and on the very last one, it pulled the pad off the board. Is the board still good? Can I just take the pad off the battery end and reapply it?

Dispositivo:

iPod Touch 2nd Generation

Stato:

open