Salta al contenuto principale
Aiuto

Versione corrente di: oldturkey03 (dettagli voto) ,

Titolo:

During reassembly a small Magnet left behind

Testo:

I swapped out the optical drive from what was supposed to be a dead 12" PowerBook into a revived G4 iBook. (upon reassembly the PowerBook now works !!! What a technician I am !!!)

I followed the instructions provided on here (including the small round magnet under the keyboard, so this 'spare' magnet is not that one).

But once I was complete, I had a small rectangular magnet still sitting on my screw guide.  reviewed the instructions but found no reference to it.

It is approx 1/4" wide, 1/2" long and 1/8" thick.

Any clues where is goes?

BTW, I was also taking the PowerBook apart (other side of the table to prevent crossing parts). I found no reference to a magnet in those instructions either.

Dispositivo:

iBook G4 12" 800 MHz-1.2 GHz

Stato:

open

Risposta Accettata:

+10346

Modifica di: StevieB from ABQ ,

Titolo:

During reassembly a small Magnet left behind

Testo:

I swapped out the optical drive from what was supposed to be a dead 12" PowerBook into a revived G4 iBook. (upon reassembly the PowerBook now works !!! What a technician I am !!!)
I followed the instructions provided on here (including the small round magnet under the keyboard, so this 'spare' magnet is not that one).
But once I was complete, I had a small rectangular magnet still sitting on my screw guide. reviewed the instructions but found no reference to it.
It is approx 1/4" wide, 1/2" long and 1/8" thick.
Any clues where is goes?
-BTW, I was also taking the PowerBook apart (other side of the table to prevent crossing parts).
+BTW, I was also taking the PowerBook apart (other side of the table to prevent crossing parts). I found no reference to a magnet in those instructions either.

Dispositivo:

iBook G4 12" 800 MHz-1.2 GHz

Stato:

open

Modifica di: StevieB from ABQ ,

Titolo:

During reassembly a small Magnet left behind

Testo:

I swapped out the optical drive from what was supposed to be a dead 12" PowerBook into a revived G4 iBook. (upon reassembly the PowerBook now works !!! What a technician I am !!!)
I followed the instructions provided on here (including the small round magnet under the keyboard, so this 'spare' magnet is not that one).
But once I was complete, I had a small rectangular magnet still sitting on my screw guide. reviewed the instructions but found no reference to it.
-It is approx 3/8" wide, 1/2" long and 1/8" thick.
+It is approx 1/4" wide, 1/2" long and 1/8" thick.
Any clues where is goes?
BTW, I was also taking the PowerBook apart (other side of the table to prevent crossing parts).

Dispositivo:

iBook G4 12" 800 MHz-1.2 GHz

Stato:

open

Post originale di: StevieB from ABQ ,

Titolo:

During reassembly a small Magnet left behind

Testo:

I swapped out the optical drive from what was supposed to be a dead 12" PowerBook into a revived G4 iBook. (upon reassembly the PowerBook now works !!! What a technician I am !!!)

I followed the instructions provided on here (including the small round magnet under the keyboard, so this 'spare' magnet is not that one).

But once I was complete, I had a small rectangular magnet still sitting on my screw guide.  reviewed the instructions but found no reference to it.

It is approx 3/8" wide, 1/2" long and 1/8" thick.

Any clues where is goes?

BTW, I was also taking the PowerBook apart (other side of the table to prevent crossing parts).

Dispositivo:

iBook G4 12" 800 MHz-1.2 GHz

Stato:

open