Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Aiuto

Versione corrente di: SecondHandMac ,

Testo:

Question = Answered...
 
I disassembled both machines this evening, and upon attaching the 2010 screen assembly to the 2011 body, I noticed two things:
 
1) 11.6" Mid-2011 MacBook Air's did not use a shim between the hinge and case assembly unlikelike the 2010 model, which had a single metal shim between each hinge.
1) 11.6" Mid-2011 MacBook Air's did not use a shim between the hinge and case assembly unlikelike the 2010 model, which had a single metal shim between each hinge.
 
2) Since the Bluetooth/Airport board is mounted differently on the Mid-2011 i5 Logic Board, the antenna cables on the Late-2010 screen assembly DO NOT reach. I repeat, they DO NOT REACH.
2) Since the Bluetooth/Airport board is mounted differently on the Mid-2011 i5 Logic Board, the antenna cables on the Late-2010 screen assembly DO NOT reach. I repeat, they DO NOT REACH.
 
Long story short - This does not work.
 
Hope this helps.

Stato:

open

Modifica di: SecondHandMac ,

Testo:

SteveM,Question = Answered...
SteveM,Question = Answered...
 
Were you successful in this? I have the exact same issueI disassembled both machines this evening, and have postedupon attaching the same question on IFixIt and then stumbled on2010 screen assembly to this thread.the 2011 body, I noticed two things:
Were you successful in this? I have the exact same issueI disassembled both machines this evening, and have postedupon attaching the same question on IFixIt and then stumbled on2010 screen assembly to this thread.the 2011 body, I noticed two things:
 
Reply is appreciated as I would like to do this swap this weekend1) 11.6" Mid-2011 MacBook Air's did not use a shim between the hinge and case assembly unlike the 2010 model, which had a single metal shim between each hinge.
Reply is appreciated as I would like to do this swap this weekend1) 11.6" Mid-2011 MacBook Air's did not use a shim between the hinge and case assembly unlike the 2010 model, which had a single metal shim between each hinge.
 
Thanks!2) Since the Bluetooth/Airport board is mounted differently on the Mid-2011 Logic Board, the antenna cables on the Late-2010 screen assembly DO NOT reach. I repeat, they DO NOT REACH.

Long story short - This does not work.

Hope this helps.
Thanks!2) Since the Bluetooth/Airport board is mounted differently on the Mid-2011 Logic Board, the antenna cables on the Late-2010 screen assembly DO NOT reach. I repeat, they DO NOT REACH.

Long story short - This does not work.

Hope this helps.

Stato:

open

Post originale di: SecondHandMac ,

Testo:

SteveM,

Were you successful in this? I have the exact same issue and have posted the same question on IFixIt and then stumbled on to this thread.

Reply is appreciated as I would like to do this swap this weekend.

Thanks!

Stato:

open