Introduzione

The iMac G3 (Tray-Loading)

The iMac G3 was Apple's new G3 all-in-one. It had tons of new features, and removed all old interfaces. It was released in 1998, and sported a 266Mhz, or 333Mhz PowerPC G3. It also came in five colors: tangerine, blueberry, lime, grape, and strawberry. These were known as the "5 Flavors."

The iMac G3. This was a great computer for the time, and had plenty of features.
  • The iMac G3. This was a great computer for the time, and had plenty of features.

Aggiungi Commento

Start by flipping the iMac upside-down. It may help to lay it on a towel, so you don't damage the screen, or scratch the face.
  • Start by flipping the iMac upside-down. It may help to lay it on a towel, so you don't damage the screen, or scratch the face.

Aggiungi Commento

Remove this Phillips screw. Using a flathead screwdriver, work your way around the bottom cover, until it comes off. Then, lift the bottom cover up and out, and set it aside.
  • Remove this Phillips screw.

  • Using a flathead screwdriver, work your way around the bottom cover, until it comes off.

  • Then, lift the bottom cover up and out, and set it aside.

Aggiungi Commento

MacBook Battery Fix Kits
Fix Kits Starting at $69.99
MacBook Battery Fix Kits
Starting at $69.99
Now, remove the DB-15 Video connector from the logic board. It may be helpful to use a Phillips screwdriver to remove the thumbscrews. It may be helpful to use a Phillips screwdriver to remove the thumbscrews.
  • Now, remove the DB-15 Video connector from the logic board.

  • It may be helpful to use a Phillips screwdriver to remove the thumbscrews.

Aggiungi Commento

Remove the power cable from the logic board assembly. Remove the power cable from the logic board assembly. Remove the power cable from the logic board assembly.
  • Remove the power cable from the logic board assembly.

Aggiungi Commento

Remove the front panel connector. Remove the front panel connector.
  • Remove the front panel connector.

Aggiungi Commento

Now, remove these Phillips screws. Now, grab the logic board assembly by the piece of plastic, and lift it out. Now, grab the logic board assembly by the piece of plastic, and lift it out.
  • Now, remove these Phillips screws.

  • Now, grab the logic board assembly by the piece of plastic, and lift it out.

Aggiungi Commento

The logic board assembly. This is the heart of the computer, it contains the motherboard, CPU, RAM, V-RAM, PRAM battery, the hard drive, and the optical drive.
  • The logic board assembly. This is the heart of the computer, it contains the motherboard, CPU, RAM, V-RAM, PRAM battery, the hard drive, and the optical drive.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Chris Green

Membro da: 11/10/2009

30.913 Reputazione

46 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

273 Membri

697 Guide realizzate

Just did this on my Grape 333 Mhz and on my Lime 333 Mhz which come from from the same place. Actually, I'm surprised that the Grape's logic board has a white IrDA connector which its twin doesn't have...

Nicolas Zbinden - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 51

Tutti i Tempi: 13,986