Introduzione

Use this guide to replace the outer case on your Nintendo Wii U GamePad.

Parti

Nessuna parte richiesta.

Face the GamePad down and unscrew the two Phillips #00 screws which are attached to the battery cover. Lift up and remove the battery cover.
  • Face the GamePad down and unscrew the two Phillips #00 screws which are attached to the battery cover.

  • Lift up and remove the battery cover.

Aggiungi Commento

With your finger on the battery connector, pull downwards toward the base of the GamePad to disconnect it. Pull upwards from the bottom of the battery to release it. Pull upwards from the bottom of the battery to release it.
  • With your finger on the battery connector, pull downwards toward the base of the GamePad to disconnect it.

  • Pull upwards from the bottom of the battery to release it.

Aggiungi Commento

Remove the ten 8.9mm Tri-wing Y1 screws hidden underneath square stickers. Lift up the back plate. The back plate is still connected by a cable to the motherboard.
  • Remove the ten 8.9mm Tri-wing Y1 screws hidden underneath square stickers.

  • Lift up the back plate.

  • The back plate is still connected by a cable to the motherboard.

how do i replace the whole front and back casing?

enbodylin - Replica

Unplug the connector that connects the back plate to the motherboard. Remove the back plate.
  • Unplug the connector that connects the back plate to the motherboard.

  • Remove the back plate.

You don't have to remove just be careful

Heather Sheppard - Replica

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Kim Arre

Membro da: 11/01/2013

2.953 Reputazione

18 Guide realizzate

Team

iFixit Membro di iFixit

Community

114 Membri

5.894 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 92

Tutti i Tempi: 8,758