Introduzione

This is a guide on removing the light bulbs from their colored-plastic shell, but not replacing the bulb. Take care not to use too much force as the bulbs or wires may get damaged while being extracted.

Remove the screws on the back panel with the #1 Phillips screwdriver bit.
  • Remove the screws on the back panel with the #1 Phillips screwdriver bit.

    • The screws in the rubber legs of the burner do not need to be removed.

    • If the back panel has never been opened before, the screws may be more difficult to unscrew.

Aggiungi Commento

Using a wrench, remove the bolt from the center of the back panel. Using a wrench, remove the bolt from the center of the back panel.
  • Using a wrench, remove the bolt from the center of the back panel.

Aggiungi Commento

The back panel can now be easily lifted off.
  • The back panel can now be easily lifted off.

Aggiungi Commento

Using two thin screwdrivers (or similar objects) wedge them into the slots of the plastic shell of the desired light.
  • Using two thin screwdrivers (or similar objects) wedge them into the slots of the plastic shell of the desired light.

Aggiungi Commento

Push the screwdrivers inward and guide the bulb outwards. Gently grab by the wires and remove bulb from plastic shell.
  • Push the screwdrivers inward and guide the bulb outwards.

  • Gently grab by the wires and remove bulb from plastic shell.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Sun Fai Lau

Membro da: 22/09/2014

513 Reputazione

5 Guide realizzate

Team

USF Tampa, Team 10-7, Brown Fall 2014 Membro di USF Tampa, Team 10-7, Brown Fall 2014

USFT-BROWN-F14S10G7

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 129