Introduzione

In this guide you will learn how to replace the chip set in a Wahl Lithium Ion Trimmer.

Strumenti

Nessun attrezzo richiesto.

Parti

Refer to the 4th step in Disassemble Guide which will expose the inside of the trimmer allowing access to the battery, electric motor and the chip set.
  • Refer to the 4th step in Disassemble Guide which will expose the inside of the trimmer allowing access to the battery, electric motor and the chip set.

Aggiungi Commento

Remover the motor, battery and chip set from the plastic casing.
  • Remover the motor, battery and chip set from the plastic casing.

Aggiungi Commento

Remove the white plastic piece and focus on removing the wires from the chip set. If necessary cut the wires as close to the chip set as possible that way you can reconnect them to the new one.
  • Remove the white plastic piece and focus on removing the wires from the chip set. If necessary cut the wires as close to the chip set as possible that way you can reconnect them to the new one.

Aggiungi Commento

Exchange the old chip set with the new one and reconnect the wires and white piece.
  • Exchange the old chip set with the new one and reconnect the wires and white piece.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

nathan

Membro da: 22/10/2013

1.150 Reputazione

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 30

Tutti i Tempi: 1,974