Salta al contenuto principale

Venturer CR20 Power Cord Replacement

Cosa ti serve

  1. Venturer CR20 Power Cord Replacement, Front Screen: passo 1, immagine 1 di 1
    • On the bottom of the clock locate and unscrew the single 2mm Phillips screw from bottom of the clock.

  2. Venturer CR20 Power Cord Replacement: passo 2, immagine 1 di 2 Venturer CR20 Power Cord Replacement: passo 2, immagine 2 di 2
    • Using a moderate amount of force, position the screwdriver in the crack between the front screen and the main body of the clock (as shown) and push the screen away from the main body of the clock.

  3. Venturer CR20 Power Cord Replacement, Power Cord: passo 3, immagine 1 di 2 Venturer CR20 Power Cord Replacement, Power Cord: passo 3, immagine 2 di 2
    • Get a firm grip on the outside of the clock and a firm grip on the hardware on the inside of the the clock like so and pull the hardware out from the outside of the clock.

  4. Venturer CR20 Power Cord Replacement: passo 4, immagine 1 di 3 Venturer CR20 Power Cord Replacement: passo 4, immagine 2 di 3 Venturer CR20 Power Cord Replacement: passo 4, immagine 3 di 3
    • Using your fingers, pull the power cord connector, outlined in the picture with a red rectangle straight up to disconnect from the alarm clock.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Robert Myers

Membro da: 01/11/13

54 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 5-15, Forte Winter 2013 Membro di Cal Poly, Team 5-15, Forte Winter 2013

CPSU-FORTE-W13S5G15

5 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 379