Aggiusta la tua roba Comunità Store

UTStarcom CDM8945vw Keyboard Replacement

Introduzione

Follow this guide to properly replace the keyboard.

Cosa ti serve

  1. UTStarcom CDM8945vw Keyboard Replacement, Battery: passo 1, immagine 1 di 1

    • Push the highlighted button in the direction in which the antenna is pointing. The battery will release and pop up.

    Traduci

  2. UTStarcom CDM8945vw Keyboard Replacement: passo 2, immagine 1 di 1

    • Remove the battery.

    Traduci

  3. UTStarcom CDM8945vw Keyboard Replacement, Antenna: passo 3, immagine 1 di 1

    • Identify the antenna. It is the extendable plastic component pictured here.

    Traduci

  4. UTStarcom CDM8945vw Keyboard Replacement: passo 4, immagine 1 di 1

    • Twist the base in a counter-clockwise motion to unscrew the antenna.

    Traduci

  5. UTStarcom CDM8945vw Keyboard Replacement: passo 5, immagine 1 di 2 UTStarcom CDM8945vw Keyboard Replacement: passo 5, immagine 2 di 2

    • The antenna should slide right out of the phone when finished.

    Traduci

  7. UTStarcom CDM8945vw Keyboard Replacement, Speaker: passo 6, immagine 1 di 1

    • Remove the small rubber grommet using the plastic opening tool.

    Traduci

  8. UTStarcom CDM8945vw Keyboard Replacement: passo 7, immagine 1 di 1

    • Remove five screws using a Phillips #00 screwdriver.

    Traduci

  9. UTStarcom CDM8945vw Keyboard Replacement: passo 8, immagine 1 di 1

    • Use the plastic opening tool to separate the two pieces that form the outer case of the phone.

    • Prying the two pieces apart may be difficult. Carefully apply a moderate amount of pressure when attempting to separate the two pieces or else you will risk breaking them.

    Traduci

  10. UTStarcom CDM8945vw Keyboard Replacement: passo 9, immagine 1 di 1

    • Remove the back piece of the outer case.

    Traduci

  11. UTStarcom CDM8945vw Keyboard Replacement: passo 10, immagine 1 di 1

    • Remove the speaker using a plastic opening tool.

    • Apply a small amount of force when removing the broken speaker from the motherboard. If you apply a large amount of force, you may rip out the wires and damage the motherboard.

    Traduci

  12. UTStarcom CDM8945vw Keyboard Replacement: passo 11, immagine 1 di 2 UTStarcom CDM8945vw Keyboard Replacement: passo 11, immagine 2 di 2

    • Remove the wire attached to the speaker from the motherboard using tweezers.

    • Apply a small amount of force when removing the wire from the motherboard. If you apply a large amount of force, you may rip out the wires and damage the motherboard.

    Traduci

  13. UTStarcom CDM8945vw Keyboard Replacement, Logic Board: passo 12, immagine 1 di 1

    • Detach the highlighted piece from the logic board using a plastic opening tool.

    Traduci

  14. UTStarcom CDM8945vw Keyboard Replacement: passo 13, immagine 1 di 2 UTStarcom CDM8945vw Keyboard Replacement: passo 13, immagine 2 di 2

    • Remove the logic board from the anterior piece of the outer case using the plastic opening tool.

    Traduci

  15. UTStarcom CDM8945vw Keyboard Replacement, Keyboard: passo 14, immagine 1 di 1

    • Remove the keyboard.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Bryon Hazlewood

Membro da: 10/03/12

1 Reputazione

2 Guide realizzate

Distintivi: 2

Team

Cal Poly, Team 24-26, Regan Fall 2012 Membro di Cal Poly, Team 24-26, Regan Fall 2012

CPSU-REGAN-F12S24G26

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 310