Introduzione

This guide is useful for replacing a broken hard drive on your laptop. All of your computer's important data is stored on the hard drive. In this replacement guide, you will remove the hard drive cover to access the hard drive.

Note: Before starting any removal or installation, remember to turn off the device and to remove it from the power source.

Parti

Nessuna parte richiesta.

Remove the two 7 mm screws with a Phillips#00 Screwdriver
  • Remove the two 7 mm screws with a Phillips#00 Screwdriver

Aggiungi Commento

Using a flat head from a plastic opening tool to lift open the cover.
  • Using a flat head from a plastic opening tool to lift open the cover.

Aggiungi Commento

Remove the four 6mm screws with the Phillips #00 screwdriver.
  • Remove the four 6mm screws with the Phillips #00 screwdriver.

Aggiungi Commento

Pull out black tab located on the hard drive to slide it out.
  • Pull out black tab located on the hard drive to slide it out.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Mike Kennedy

Membro da: 18/04/2013

106 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 2-21, Maness Spring 2013 Membro di Cal Poly, Team 2-21, Maness Spring 2013

CPSU-MANESS-S13S2G21

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 23

Tutti i Tempi: 2,140