Introduzione

The optical drive reads the CD/DVD when inserted into the laptop. It is not unusual for the optical drive to go stop working or malfunction as there are numerous moving parts. This device is designed to be easily replaced in the case it does malfunction.

Parti

Nessuna parte richiesta.

Make sure the battery lock switch is switched to the unlocked position. The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock. The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock.
  • Make sure the battery lock switch is switched to the unlocked position.

    • The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock.

Aggiungi Commento

Slide the battery release switch to the left. The switch is spring loaded, so you must hold the switch in place while removing the battery.
  • Slide the battery release switch to the left.

  • The switch is spring loaded, so you must hold the switch in place while removing the battery.

Aggiungi Commento

Using a finger, lift up the battery. The battery release switch must be held in place.
  • Using a finger, lift up the battery.

  • The battery release switch must be held in place.

Aggiungi Commento

Remove the two screws holding the hard drive panel down. These screw are permanently fastened to the panel; they are designed to be removed only partially. These screw are permanently fastened to the panel; they are designed to be removed only partially.
  • Remove the two screws holding the hard drive panel down.

  • These screw are permanently fastened to the panel; they are designed to be removed only partially.

Aggiungi Commento

Use a finger to lift up on the tab and remove the panel.
  • Use a finger to lift up on the tab and remove the panel.

Aggiungi Commento

Remove the screw that holds in place the optical drive. One 4.6 mm Phillips screw.
  • Remove the screw that holds in place the optical drive.

    • One 4.6 mm Phillips screw.

Aggiungi Commento

Locate the small rectangular hole and insert the spudger. Gently slide the metal flange to the right to dislodge the optical drive.
  • Locate the small rectangular hole and insert the spudger.

  • Gently slide the metal flange to the right to dislodge the optical drive.

Aggiungi Commento

The optical drive will become partially exposed.
  • The optical drive will become partially exposed.

Aggiungi Commento

Pull the optical drive to remove it from the computer body. Pull the optical drive to remove it from the computer body.
  • Pull the optical drive to remove it from the computer body.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Stephen Sippel

Membro da: 16/04/2013

143 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 21-54, Johann Spring 2013 Membro di Cal Poly, Team 21-54, Johann Spring 2013

CPSU-JOHANN-S13S21G54

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 644