Introduzione

The bottom access panel is designed to be quickly and easily removed to allow the consumer quick access to components of the the computer including RAM, the wireless card, and the dial up modem. This panel requires only the the removal of a five screws to gain the user access.

Parti

Nessuna parte richiesta.

Make sure the battery lock switch is switched to the unlocked position. The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock. The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock.
  • Make sure the battery lock switch is switched to the unlocked position.

    • The battery is unlocked when the battery lock switch is slid to the side with an image of an unlocked lock.

Aggiungi Commento

Slide the battery release switch to the left. The switch is spring loaded, so you must hold the switch in place while removing the battery.
  • Slide the battery release switch to the left.

  • The switch is spring loaded, so you must hold the switch in place while removing the battery.

Aggiungi Commento

Using a finger, lift up the battery. The battery release switch must be held in place.
  • Using a finger, lift up the battery.

  • The battery release switch must be held in place.

Aggiungi Commento

Remove the 5 Phillips screws holding the panel in place. These screws are permanently fastened to the panel; they are designed to be removed only partially to avoid loss. These screws are permanently fastened to the panel; they are designed to be removed only partially to avoid loss.
  • Remove the 5 Phillips screws holding the panel in place.

  • These screws are permanently fastened to the panel; they are designed to be removed only partially to avoid loss.

Aggiungi Commento

Use a finger to remove the panel by lifting up on the provided removal tab. Use a finger to remove the panel by lifting up on the provided removal tab. Use a finger to remove the panel by lifting up on the provided removal tab.
  • Use a finger to remove the panel by lifting up on the provided removal tab.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Stephen Sippel

Membro da: 16/04/2013

143 Reputazione

9 Guide realizzate

Team

Cal Poly, Team 21-54, Johann Spring 2013 Membro di Cal Poly, Team 21-54, Johann Spring 2013

CPSU-JOHANN-S13S21G54

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 577