Parti

Nessuna parte richiesta.

Open the laptop so the keyboard is facing you and the locate the thin plastic cover located directly above the keyboard. Using your fingers, remove this long piece of plastic gently. Do not apply too much force when removing the cover piece as it can break.
  • Open the laptop so the keyboard is facing you and the locate the thin plastic cover located directly above the keyboard.

  • Using your fingers, remove this long piece of plastic gently.

  • Do not apply too much force when removing the cover piece as it can break.

Aggiungi Commento

Remove the two 4.8 mm type-0 Phillips head screws located underneath the plastic cover piece.
  • Remove the two 4.8 mm type-0 Phillips head screws located underneath the plastic cover piece.

Aggiungi Commento

Starting at the top, gently raise the keyboard enough to remove it from the socket. DO NOT pull out the keyboard after its out of its socket. The keyboard is connected to the hard drive through a data cable and removing forcefully could damage the cable and laptop.
  • Starting at the top, gently raise the keyboard enough to remove it from the socket.

  • DO NOT pull out the keyboard after its out of its socket. The keyboard is connected to the hard drive through a data cable and removing forcefully could damage the cable and laptop.

Aggiungi Commento

Locate the data cable that is connected to the motherboard. Pull the white ZIF connector towards the screen to remove it.
  • Locate the data cable that is connected to the motherboard.

  • Pull the white ZIF connector towards the screen to remove it.

  • Pull the black ribbon cable away from the screen.

Aggiungi Commento

With the black ribbon cable now disconnected, remove the keyboard from  its housing.
  • With the black ribbon cable now disconnected, remove the keyboard from its housing.

Aggiungi Commento

Close your laptop and flip it over. Remove the 13 screws circled in image 2.
  • Close your laptop and flip it over.

  • Remove the 13 screws circled in image 2.

Aggiungi Commento

Turn the laptop over and open the lid.

Aggiungi Commento

Gently disconnect the ribbon cable.
  • Gently disconnect the ribbon cable.

  • Gently disconnect the multicolored cable.

Aggiungi Commento

Gently pull the top case from the bottom case of the laptop.
  • Gently pull the top case from the bottom case of the laptop.

Aggiungi Commento

Unscrew the two screws on the hinge.  (Be careful to not damage nearby wires) Both hinges shown, but replacing both may not be necessary.
  • Unscrew the two screws on the hinge. (Be careful to not damage nearby wires)

  • Both hinges shown, but replacing both may not be necessary.

  • Congratulations, you may now remove and replace your hinge!

  • Follow these steps in reverse order to reassemble your laptop.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Tyler

Membro da: 11/03/2014

201 Reputazione

2 Guide realizzate

Team

Will this work for a Toshiba satellite l655 model

ethanhunemuller - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 21

Ultimi 30 Giorni: 86

Tutti i Tempi: 4,816