Parti

Nessuna parte richiesta.

Remove the 5.75 mm screw from the cover panel. Turn the laptop over with the screen facing down.
  • Remove the 5.75 mm screw from the cover panel.

  • Turn the laptop over with the screen facing down.

Aggiungi Commento

Lift up the cover panel using a plastic opening tool.
  • Lift up the cover panel using a plastic opening tool.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Remove the 5.64 mm screw from the bottom of the crossing bar. Remove the crossing bar.
  • Remove the 5.64 mm screw from the bottom of the crossing bar.

  • Remove the crossing bar.

Aggiungi Commento

Use a plastic opening tool to disconnect the black and white antenna cable's connectors from the Wi-Fi card. Note that the black wire is connected to the port that is labeled main.
  • Use a plastic opening tool to disconnect the black and white antenna cable's connectors from the Wi-Fi card.

    • Note that the black wire is connected to the port that is labeled main.

Aggiungi Commento

Use fingers to push the clips away from memory card. Use fingers to push the clips away from memory card.
  • Use fingers to push the clips away from memory card.

Aggiungi Commento

Use fingers to remove the Wi-Fi card.
  • Use fingers to remove the Wi-Fi card.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Garrett Gudgel

Membro da: 05/10/2010

714 Reputazione

13 Guide realizzate

Team

Cal Poly, Team 4-43, Amido Fall 2010 Membro di Cal Poly, Team 4-43, Amido Fall 2010

CPSU-AMIDO-F10S4G43

5 Membri

13 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 3,033