Introduzione

This is a step by step guide of how to replace the speakers in case of malfunction or upgrade.

Parti

Nessuna parte richiesta.

Flip the laptop over so the bottom is facing up.
  • Flip the laptop over so the bottom is facing up.

  • Slide each of the three tabs on the bottom half of the assembly into the unlocked position.

Aggiungi Commento

Gently lift the battery out of the computer.
  • Gently lift the battery out of the computer.

Aggiungi Commento

Remove the single 3mm Phillips #00 screw that secures the wireless card cover.
  • Remove the single 3mm Phillips #00 screw that secures the wireless card cover.

Aggiungi Commento

Remove the WIFI module cover. It will pull right off.
  • Remove the WIFI module cover. It will pull right off.

Aggiungi Commento

Unplug the white and black wires from the WiFi module. Unplug the white and black wires from the WiFi module.
  • Unplug the white and black wires from the WiFi module.

Aggiungi Commento

Remove the twelve 8mm button head Phillips #00 B8 screws.
  • Remove the twelve 8mm button head Phillips #00 B8 screws.

  • Remove the two 14 mm button head Phillips #00 B14 screws.

  • Remove the two 10 mm Phillips #00 battery compartment screws.

  • Remove the two 8 mm Phillips #00 screws.

Aggiungi Commento

Remove the seven 4mm flat Phillips #00 screws.
  • Remove the seven 4mm flat Phillips #00 screws.

  • Remove the seven 20mm button head Phillips #00 screws.

Aggiungi Commento

Use the plastic opening tool to pry the two halves apart.
  • Use the plastic opening tool to pry the two halves apart.

Aggiungi Commento

Locate the plug for the speaker wires on the bottom of the laptop. Locate the plug for the speaker wires on the bottom of the laptop.
  • Locate the plug for the speaker wires on the bottom of the laptop.

Aggiungi Commento

Unplug the speaker wire connector.
  • Unplug the speaker wire connector.

Aggiungi Commento

Remove the speakers by sliding them straight up. They should slide out with ease.
  • Remove the speakers by sliding them straight up. They should slide out with ease.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Cole Uhland

Membro da: 30/09/2013

216 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 14-8, Forte Fall 2013 Membro di Cal Poly, Team 14-8, Forte Fall 2013

CPSU-FORTE-F13S14G8

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 311