Introduzione

The speaker cover, located above the keyboard, can be removed by following these simple steps.

Parti

Nessuna parte richiesta.

Locate the two sliding locks indicated in the photo.
  • Locate the two sliding locks indicated in the photo.

  • Slide the right lock (labeled "1") to the right. It will remain in the unlocked position.

  • Slide the left lock (labeled "2") to the left and hold it in place.

Aggiungi Commento

While holding the left lock, place your finger in the indentation next to the battery and lift the battery out.
  • While holding the left lock, place your finger in the indentation next to the battery and lift the battery out.

Aggiungi Commento

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the four screws indicated in the photos using a Phillips 00 Screwdriver. Left to right: 6mm button-head, 3mm flat-head, 6mm button-head, 6mm button-head. Remove the four screws indicated in the photos using a Phillips 00 Screwdriver. Left to right: 6mm button-head, 3mm flat-head, 6mm button-head, 6mm button-head. Remove the four screws indicated in the photos using a Phillips 00 Screwdriver. Left to right: 6mm button-head, 3mm flat-head, 6mm button-head, 6mm button-head.
  • Remove the four screws indicated in the photos using a Phillips 00 Screwdriver. Left to right: 6mm button-head, 3mm flat-head, 6mm button-head, 6mm button-head.

Aggiungi Commento

With your hands, grasp the speaker cover on the edge nearest to the screen.
  • With your hands, grasp the speaker cover on the edge nearest to the screen.

  • Pry the speaker cover upward.

Aggiungi Commento

Remove the speaker cover. Your laptop will look like this photo when the speaker cover has been removed.
  • Remove the speaker cover. Your laptop will look like this photo when the speaker cover has been removed.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Daniel Johnson

Membro da: 07/04/2013

94 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 17-6, Regan Spring 2013 Membro di Cal Poly, Team 17-6, Regan Spring 2013

CPSU-REGAN-S13S17G6

5 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 3

Tutti i Tempi: 963