Parti

Nessuna parte richiesta.

Using the spudger, gently pry the desired key up on one side. This will release the key.
  • Using the spudger, gently pry the desired key up on one side. This will release the key.

  • The key is held in place by very small plastic pieces. Improper removal or installation may damage key permanently and require entire keyboard replacement.

Aggiungi Commento

Use a brush to remove debris and use a cleaner cloth to remove residue. Similarly, remove debris and residue from the area of the keyboard where the key was originally seated.
  • Use a brush to remove debris and use a cleaner cloth to remove residue.

  • Similarly, remove debris and residue from the area of the keyboard where the key was originally seated.

Aggiungi Commento

Once clean, set the key above its original position and firmly press it back into place.
  • Once clean, set the key above its original position and firmly press it back into place.

  • If cleaned and installed properly the key should depress smoothly and spring back to normal position once released.

Aggiungi Commento

Conclusione

This is a complete guide to removing a key and cleaning the area before replacement.

Mason McCaskill

Membro da: 18/10/2013

943 Reputazione

9 Guide realizzate

Team

Clemson, Team 14-2, Benson Fall 2013 Membro di Clemson, Team 14-2, Benson Fall 2013

CLEM-BENSON-F13S14G2

3 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 299