Introduzione

The keyboard mat is what makes contacts with the motherboard. If the keys are not working very well then the mat may need replacing.

Strumenti

Parti

Nessuna parte richiesta.

Remove the battery cover. Remove the AAA batteries from the calculator.
  • Remove the battery cover.

  • Remove the AAA batteries from the calculator.

Aggiungi Commento

Remove the 5mm Philips #00 screw holding backup battery cover.
  • Remove the 5mm Philips #00 screw holding backup battery cover.

  • Remove the backup battery cover.

Aggiungi Commento

Use plastic opening tool to remove the backup battery.  Place the tool in the small cut-out next to the battery and pry the battery out.
  • Use plastic opening tool to remove the backup battery. Place the tool in the small cut-out next to the battery and pry the battery out.

  • Be careful, the backup battery is spring loaded and may shoot up when you remove it.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.
  • Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.

Aggiungi Commento

Pry back case off.  Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart. Pry back case off.  Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.
  • Pry back case off. Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.

Aggiungi Commento

Keep the screen face-down during this step. Only the motherboard is attached to the face-plate and the screen may fall out. Remove the eight (8) 5mm Philips #00  screws on the motherboard.
  • Keep the screen face-down during this step. Only the motherboard is attached to the face-plate and the screen may fall out.

  • Remove the eight (8) 5mm Philips #00 screws on the motherboard.

Aggiungi Commento

Carefully remove the motherboard and screen.  Grab the board by its side with one hand and the screen with the other.  Carefully lift the two parts up. Keep the face-plate face-down to prevent the keys from falling out.
  • Carefully remove the motherboard and screen. Grab the board by its side with one hand and the screen with the other. Carefully lift the two parts up.

    • Keep the face-plate face-down to prevent the keys from falling out.

Aggiungi Commento

Remove light gray rubber keyboard mat. Keep your calculator face down to ensure the individual keys do not fall out.
  • Remove light gray rubber keyboard mat.

  • Keep your calculator face down to ensure the individual keys do not fall out.

Aggiungi Commento

Clean the contacts on the keyboard with a soft cloth.
  • Clean the contacts on the keyboard with a soft cloth.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

corey

Membro da: 02/10/2012

11 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 18-37, Regan Fall 2012 Membro di Cal Poly, Team 18-37, Regan Fall 2012

CPSU-REGAN-F12S18G37

5 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 19

Tutti i Tempi: 3,167