Introduzione

The stylus, which actually reads the record and transmits the signal, wears out over time. According to the TEAC manual for this device, that should be around 50 hours. Replacing or cleaning the stylus will help improve sound quality if done correctly, but should be done very carefully.

Turn off record the player before making repairs. Unplug the record player.
  • Turn off record the player before making repairs.

  • Unplug the record player.

Aggiungi Commento

Open the lid to access the turntable, arm, and stylus. Open the lid to access the turntable, arm, and stylus.
  • Open the lid to access the turntable, arm, and stylus.

Aggiungi Commento

Press down on the front of the red stylus and pull forward to remove it from the arm.
  • Press down on the front of the red stylus and pull forward to remove it from the arm.

Aggiungi Commento

Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.
  • Insert a new stylus by pushing it back up where the old one was, or, if necessary, clean the old one and replace likewise.

Aggiungi Commento

Linea Traguardo

Un'altra persona ha completato questa guida.

Charles Lockner

Membro da: 17/09/2012

103 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 2-61, Propen Fall 2012 Membro di Cal Poly, Team 2-61, Propen Fall 2012

CPSU-PROPEN-F12S2G61

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 6

Tutti i Tempi: 1,167