Introduzione

Use this guide when you need to replace the battery because it has died.

Parti

Nessuna parte richiesta.

Remove the four Torx T5 screws from the back panel.
  • Remove the four Torx T5 screws from the back panel.

Aggiungi Commento

Wedge a spudger in between the front and back panel.
  • Wedge a spudger in between the front and back panel.

  • Apply leverage downwards to the spudger in order to remove the back panel.

Aggiungi Commento

Slide the battery out from under the brown wire-tape.
  • Slide the battery out from under the brown wire-tape.

    • Be careful of the wires still connected to the other end of the battery. Do not pull or damage may occur.

Aggiungi Commento

Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.
  • Slowly pull the white plug from its receptor. Grasp its sides firmly with a pair of tweezers and gently wiggle from side to side.

Aggiungi Commento

Linea Traguardo

Un'altra persona ha completato questa guida.

Daniel Wiseman

Membro da: 20/01/2012

127 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 10-33, Amido Winter 2012 Membro di Cal Poly, Team 10-33, Amido Winter 2012

CPSU-AMIDO-W12S10G33

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 691