Heat to soften back cover sticker. Place suction cup and pull open a gap.
  • Heat to soften back cover sticker.

  • Place suction cup and pull open a gap.

Aggiungi Commento

Insert into guitar pick, slide and cut the sticker. Finally, remove the back cover. Insert into guitar pick, slide and cut the sticker. Finally, remove the back cover. Insert into guitar pick, slide and cut the sticker. Finally, remove the back cover.
  • Insert into guitar pick, slide and cut the sticker. Finally, remove the back cover.

Aggiungi Commento

Remove the battery. Remove the battery. Remove the battery.
  • Remove the battery.

Aggiungi Commento

Twist off two screws here. Release all the connectors connecting with loudspeaker assembly. Remove vibrator securing bracket.
  • Twist off two screws here.

  • Release all the connectors connecting with loudspeaker assembly.

  • Remove vibrator securing bracket.

Aggiungi Commento

Remove loudspeaker assembly cover and assembly itself. Remove loudspeaker assembly cover and assembly itself.
  • Remove loudspeaker assembly cover and assembly itself.

Aggiungi Commento

Pry up the MIC. It's a part of the main flex. Release the connector with LCD screen flex and the connector with motherboard. Release the connector with LCD screen flex and the connector with motherboard.
  • Pry up the MIC. It's a part of the main flex.

  • Release the connector with LCD screen flex and the connector with motherboard.

Aggiungi Commento

Push the upper power button & volume button flex branch bracket as the direction marked, and then remove it easily. Pry up the lower shutter button flex branch bracket carefully. It's different from the upper one, it's come with the flex together but the upper one not. Pry up the lower shutter button flex branch bracket carefully. It's different from the upper one, it's come with the flex together but the upper one not.
  • Push the upper power button & volume button flex branch bracket as the direction marked, and then remove it easily.

  • Pry up the lower shutter button flex branch bracket carefully. It's different from the upper one, it's come with the flex together but the upper one not.

Aggiungi Commento

Get the flex from the sticker underneath carefully. And then, take the power button & volume button flex branch out from the slot. Finally, remove the whole main flex.
  • Get the flex from the sticker underneath carefully.

  • And then, take the power button & volume button flex branch out from the slot.

  • Finally, remove the whole main flex.

Is it ok to remove the small copper stickers under the flex?

Miguel Damayo - Replica

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 8 persone hanno completato questa guida.

Sophia

Membro da: 25/03/2014

38.763 Reputazione

111 Guide realizzate

Hello

I changed my power, but I felt the power button action do you think the problem of what can be

Thanks

mehdi ghanbarian - Replica

very good thnx

gamaa19700 - Replica

Is it ok to remove the small copper stickers under the flex?

Miguel Damayo - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 16

Ultimi 30 Giorni: 107

Tutti i Tempi: 6,127