Introduzione

How to disassemble the phone and replace the Loudspeaker.


Please SUBSCRIBE to my channel ツ

Panoramica Video

Switch off the phone. If you can't switch it off, you can use the OFF button near to the SIM card Tray. Warm the Back Cover. You can use a hairdryer.
  • Switch off the phone.

  • If you can't switch it off, you can use the OFF button near to the SIM card Tray.

  • Warm the Back Cover. You can use a hairdryer.

  • Be careful, the Back Cover is plastic.

Aggiungi Commento

Use a small suction cup and plastic tools for separating the Rear panel. There is Adhesive tape on the edges of the phone and some between the Battery and the Back Cover, as well. I found a small tab to pull just inside the top of the cover that removed the adhesive and released the back panel from the battery. Its that same style adhesive strip as used in the Iphone 5/5c/5s. There is Adhesive tape on the edges of the phone and some between the Battery and the Back Cover, as well. I found a small tab to pull just inside the top of the cover that removed the adhesive and released the back panel from the battery. Its that same style adhesive strip as used in the Iphone 5/5c/5s.
  • Use a small suction cup and plastic tools for separating the Rear panel.

  • There is Adhesive tape on the edges of the phone and some between the Battery and the Back Cover, as well. I found a small tab to pull just inside the top of the cover that removed the adhesive and released the back panel from the battery. Its that same style adhesive strip as used in the Iphone 5/5c/5s.

Aggiungi Commento

Before installing the new cover, you must clean the phone from the old adhesive tape and install a new one (if your spare part has come without double sided adhesive tape). Please SUBSCRIBE to my channel  ツ
  • Before installing the new cover, you must clean the phone from the old adhesive tape and install a new one (if your spare part has come without double sided adhesive tape).

  • Please SUBSCRIBE to my channel ツ

Should include the information about the NFC antenna.

Sounds like a dealbreaker for some people.

Diogo Pinheiro - Replica

What about it?

Makos - Replica

Disconnect the Battery Flex Cable and remove the two Philips screws. Li-Polymer Battery, 3.8V, 3200mAh Part number: LIS1543ERPC

Did you use the custom adhesive or the 3M double sided tape?

kelvinteohbc - Replica

Remove the Loudspeaker metal bracket. Remove the Loudspeaker metal bracket. Remove the Loudspeaker metal bracket.
  • Remove the Loudspeaker metal bracket.

Aggiungi Commento

Part of the Volume/PowerON/Mic flex cable is affixed onto the Loudspeaker/Vibro motor module. Under the Flex cable is the Loudspeaker. You can change only the Loudspeaker or or the Loudspeaker & Holder module.
  • Part of the Volume/PowerON/Mic flex cable is affixed onto the Loudspeaker/Vibro motor module.

  • Under the Flex cable is the Loudspeaker.

  • You can change only the Loudspeaker or or the Loudspeaker & Holder module.

  • Loudspeaker & Holder module Part No: 1282-2013

  • .

  • Please SUBSCRIBE to my channel ツ

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

ZFix

Membro da: 09/12/2013

153.703 Reputazione

433 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

277 Membri

727 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 23

Ultimi 30 Giorni: 118

Tutti i Tempi: 7,312