Introduzione

I will teach the guide reader how to access this piece and to replace it, it must be purchased.

Use the plastic opening tool to pry the top plastic section off. Use the plastic opening tool to pry the top plastic section off. Use the plastic opening tool to pry the top plastic section off.
  • Use the plastic opening tool to pry the top plastic section off.

Aggiungi Commento

Use the plastic opening tool to pry the bottom plastic section off. Use the plastic opening tool to pry the bottom plastic section off.
  • Use the plastic opening tool to pry the bottom plastic section off.

Aggiungi Commento

Remove the four 5mm screws. Use the plastic opening tool to pry off the back. Use the plastic opening tool to pry off the back.
  • Remove the four 5mm screws.

  • Use the plastic opening tool to pry off the back.

Aggiungi Commento

Use the plastic opening tool to remove the loud speaker module. Use the plastic opening tool to remove the loud speaker module. Use the plastic opening tool to remove the loud speaker module.
  • Use the plastic opening tool to remove the loud speaker module.

Aggiungi Commento

Use the plastic opening tool to detach the ribbon running across the battery. Use the plastic opening tool to detach the ribbon connecting the battery to the motherboard. Use the plastic opening tool to detach the ribbon connecting the battery to the motherboard.
  • Use the plastic opening tool to detach the ribbon running across the battery.

  • Use the plastic opening tool to detach the ribbon connecting the battery to the motherboard.

Aggiungi Commento

Unhook the 2 connections between the harness and phone shell. Using the plastic opening tool, pry the harness up and remove it. There is an adhesive on the bottom half of the battery harness.
  • Unhook the 2 connections between the harness and phone shell.

  • Using the plastic opening tool, pry the harness up and remove it.

  • There is an adhesive on the bottom half of the battery harness.

Aggiungi Commento

The final step is taking the entire harness off of the phone.
  • The final step is taking the entire harness off of the phone.

Aggiungi Commento

Use the Phillips #00 to remove the 3 5mm screws. Lift the plastic cover off. Use the plastic opening tool to pry the motherboard out of the phone shell.
  • Use the Phillips #00 to remove the 3 5mm screws.

  • Lift the plastic cover off.

  • Use the plastic opening tool to pry the motherboard out of the phone shell.

Aggiungi Commento

Use the plastic opening tool to detach the ear piece speaker.
  • Use the plastic opening tool to detach the ear piece speaker.

  • Avoid majorly bending the tiny metal hooks holding the ear piece in.

Aggiungi Commento

Once every single piece is removed from the main screen/digitizer this will be the only remaining piece. Nothing else can be removed. If you need to replace your screen this entire piece must be replaced.
  • Once every single piece is removed from the main screen/digitizer this will be the only remaining piece. Nothing else can be removed. If you need to replace your screen this entire piece must be replaced.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Adam Giniger

Membro da: 22/09/2014

1.136 Reputazione

8 Guide realizzate

Team

USF Tampa, Team 4-4, Brown Fall 2014 Membro di USF Tampa, Team 4-4, Brown Fall 2014

USFT-BROWN-F14S4G4

3 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 400