Introduzione

How to replace broken Digitizer Glass on Sony XPERIA E.


Please SUBSCRIBE to my channel ツ

Panoramica Video

Switch-off the phone. Remove the battery. Remove the battery.
  • Switch-off the phone.

  • Remove the battery.

Aggiungi Commento

The small bottom bezel is held by 2x locking clips. Preferably use plastic tools for disassembling. Preferably use plastic tools for disassembling.
  • The small bottom bezel is held by 2x locking clips.

  • Preferably use plastic tools for disassembling.

Aggiungi Commento

There are 4x silver screws and 3x black screws. The rear cover is held by 5x locking clips. Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.
  • There are 4x silver screws and 3x black screws.

  • The rear cover is held by 5x locking clips.

  • Two of them, at the bottom side are more hard for unlocking. You can use a screwdriver or other metal tool to unlock them.

Aggiungi Commento

Remove the back cover. With a plastic tool disconnect one by one: LCD Display flex cable
  • Remove the back cover.

  • With a plastic tool disconnect one by one:

    • LCD Display flex cable

    • Touchscreen flex cable

    • Menu Buttons Board flex cable

    • Coaxial Wire Antenna cable

Aggiungi Commento

Carefully remove the main board. Carefully remove the main board.
  • Carefully remove the main board.

Aggiungi Commento

Disconnect the other side of the flex cable and remove the Home Buttons board. Unstick the camera button. Unstick the camera button.
  • Disconnect the other side of the flex cable and remove the Home Buttons board.

  • Unstick the camera button.

Aggiungi Commento

The touch screen is stuck to the frame with double side adhesive tape. By using plastic tools gently start separating. At the bottom is glued on firmly because the bonded surface is larger.
  • The touch screen is stuck to the frame with double side adhesive tape.

  • By using plastic tools gently start separating.

  • At the bottom is glued on firmly because the bonded surface is larger.

  • Use a hot air to make separating more easy and safety.

Aggiungi Commento

With a plastic tool, carefully separate the LCD display from the touch screen. Clear the touchscreen from the old adhesive tape. Clear the touchscreen from the old adhesive tape.
  • With a plastic tool, carefully separate the LCD display from the touch screen.

  • Clear the touchscreen from the old adhesive tape.

Aggiungi Commento

Install the new LCD into the frame and put adhesive tape. Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen. Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen.
  • Install the new LCD into the frame and put adhesive tape.

  • Be careful not to cover the holes (for the speaker, menu buttons etc.). Install the Touchscreen.

Aggiungi Commento

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

ZFix

Membro da: 09/12/2013

150.424 Reputazione

424 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

274 Membri

713 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 33

Tutti i Tempi: 4,516