Introduzione

If for any reason the floppy drive isn't working, the simplest solution is to replace the entire drive. But, if you're not able to aquire a new drive you may be able at least find the source of the failure through disassebling the drive.

Parti

Nessuna parte richiesta.

Turn the copmuter over so that its underside is facing up. Then slide the blue floppy drive release button down and pull the floppy drive out of the laptop.
  • Turn the copmuter over so that its underside is facing up. Then slide the blue floppy drive release button down and pull the floppy drive out of the laptop.

Aggiungi Commento

Completely remove and isolate the floppy drive from the laptop.
  • Completely remove and isolate the floppy drive from the laptop.

Aggiungi Commento

There are two screws on each side (total of four screws) of the floppy drive. Remove these screws.
  • There are two screws on each side (total of four screws) of the floppy drive. Remove these screws.

Aggiungi Commento

Once you have removed the screws, you can remove the floppy drive core from its casing as shown.
  • Once you have removed the screws, you can remove the floppy drive core from its casing as shown.

Aggiungi Commento

After you have removed the floppy drive core from its casing, unscrew these five screws shown.
  • After you have removed the floppy drive core from its casing, unscrew these five screws shown.

Aggiungi Commento

Remove the two screws holding part of the floppy processinng unit.
  • Remove the two screws holding part of the floppy processinng unit.

Aggiungi Commento

Now that the screws are removed, you can remove the entire processing unit of the floppy drive.
  • Now that the screws are removed, you can remove the entire processing unit of the floppy drive.

Aggiungi Commento

Here is an isolated image of the core hardware of the floppy drive. Here is where the floppy "magic" happens. Check for any connection failures or shortages. You may need to re solder some of the connections.
  • Here is an isolated image of the core hardware of the floppy drive. Here is where the floppy "magic" happens. Check for any connection failures or shortages. You may need to re solder some of the connections.

Aggiungi Commento

Here is an isolated image of the floppy drive casing unit.
  • Here is an isolated image of the floppy drive casing unit.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Loratious

Membro da: 20/04/2010

10 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 18-68, Johann Spring 2010 Membro di Cal Poly, Team 18-68, Johann Spring 2010

CPSU-JOHANN-S10S18G68

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,531