Salta al contenuto principale

Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement

Cosa ti serve

  1. Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement, Back Cover: passo 1, immagine 1 di 2 Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement, Back Cover: passo 1, immagine 2 di 2
    • Starting with the laptop top-down, locate and remove the twelve 1mm Phillips #0 screws securing the back cover to the main body of the computer.

  2. Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement: passo 2, immagine 1 di 2 Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement: passo 2, immagine 2 di 2
    • Use the Plastic Opening Tools or Metal Spudger to carefully loosen back cover from the body of the computer.

    • Be sure to avoid headphone jack when removing back cover by lifting cover away from computer and up.

  3. Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement: passo 3, immagine 1 di 1
    • Lift off back cover to access inner components of computer.

  4. Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement, Fan: passo 4, immagine 1 di 2 Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement, Fan: passo 4, immagine 2 di 2
    • Remove the three 1mm Phillips #0 screws surrounding the fan.

    • Loosen the three 1mm Phillips #0 screws. These screws will stay captive to the heatsink.

  5. Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement: passo 5, immagine 1 di 3 Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement: passo 5, immagine 2 di 3 Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement: passo 5, immagine 3 di 3
    • Use tweezers to carefully unplug the fan connector.

  6. Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement, Remove the Fan: passo 6, immagine 1 di 2 Sony Vaio Fit 13A Heatsink + Fan Assembly Replacement, Remove the Fan: passo 6, immagine 2 di 2
    • Use the Plastic Opening Tool to gently remove the heat sink and fan assembly from the computer.

    • Important: Follow the How to Apply Thermal Paste guide to replace the thermal paste before reassembling your device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Marii

Membro da: 01/08/15

658 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 21-19, Maness Winter 2015 Membro di Cal Poly, Team 21-19, Maness Winter 2015

CPSU-MANESS-W15S21G19

4 Membri

12 Guide realizzate

Un commento

Could you also maybe do a tutorial on Sony Vaio Fit 13? http://www.laptoppartstore.com/replace--... Any luck figuring out how the fan may be detached and re-attached to the heatsink? Also, I notice a very specific type of taping... where can one procure those?

Abhishek D - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 4,521