Introduzione

When removing the screen, you may want to use gloves so that no glass shards cut your hands.

Unscrew two 5 mm Phillips #00 screws using a Phillips #00 screwdriver located on the bottom of the back of the device.
  • Unscrew two 5 mm Phillips #00 screws using a Phillips #00 screwdriver located on the bottom of the back of the device.

Aggiungi Commento

Using a plastic opening tool, loosen the bottom portion of device.
  • Using a plastic opening tool, loosen the bottom portion of device.

Aggiungi Commento

Using a plastic opening tool, loosen the top panel of the device.
  • Using a plastic opening tool, loosen the top panel of the device.

Aggiungi Commento

Remove two 3 mm Philips #00 screws using a Phillips #00 screwdriver located on the portion under the top panel of the device.
  • Remove two 3 mm Philips #00 screws using a Phillips #00 screwdriver located on the portion under the top panel of the device.

Aggiungi Commento

Remove back plate from device. Remove back plate from device. Remove back plate from device.
  • Remove back plate from device.

Aggiungi Commento

Remove plastic USB cover using tweezers and spudger.
  • Remove plastic USB cover using tweezers and spudger.

Aggiungi Commento

Unscrew two 2 mm Philips #00 screws using a Phillips #00 screwdriver located on the top corners of the device.
  • Unscrew two 2 mm Philips #00 screws using a Phillips #00 screwdriver located on the top corners of the device.

Aggiungi Commento

Remove plastic protective plate at top of device using tweezers and spudger.
  • Remove plastic protective plate at top of device using tweezers and spudger.

Aggiungi Commento

Remove plastic protective frame located over the motherboard using tweezers and spudger. Remove plastic protective frame located over the motherboard using tweezers and spudger.
  • Remove plastic protective frame located over the motherboard using tweezers and spudger.

Aggiungi Commento

Remove screen connection from motherboard using tweezers and spudger.
  • Remove screen connection from motherboard using tweezers and spudger.

Aggiungi Commento

Remove two 3 mm Philips #00 screws at the bottom sides and two 1 mm Philips #00 screws at top sides of the device using a Phillips #00 screwdriver.
  • Remove two 3 mm Philips #00 screws at the bottom sides and two 1 mm Philips #00 screws at top sides of the device using a Phillips #00 screwdriver.

Aggiungi Commento

Using a Phillips #00 screwdriver, unscrew two 2 mm Philips #00 screws and remove motherboard from device using tweezers and prying tool. Using a Phillips #00 screwdriver, unscrew two 2 mm Philips #00 screws and remove motherboard from device using tweezers and prying tool.
  • Using a Phillips #00 screwdriver, unscrew two 2 mm Philips #00 screws and remove motherboard from device using tweezers and prying tool.

Aggiungi Commento

Disconnect metal plate from front panel of device using tweezers. Disconnect metal plate from front panel of device using tweezers.
  • Disconnect metal plate from front panel of device using tweezers.

Aggiungi Commento

Using a prying tool, remove screen from metal back plate. Using a prying tool, remove screen from metal back plate.
  • Using a prying tool, remove screen from metal back plate.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Matthew Hintz

Membro da: 16/01/2015

314 Reputazione

3 Guide realizzate

Team

USF Tampa, Team 17-6, Watkins Winter 2015 Membro di USF Tampa, Team 17-6, Watkins Winter 2015

USFT-WATKINS-W15S17G6

4 Membri

5 Guide realizzate

very helpful!!! thx

Stefan Taubert - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 10

Tutti i Tempi: 505