Introduzione

Here is a Sony TV that turned on and off every few seconds. To remedy this, replace the lamp. This is straight forward and only requires a small Allen wrench. As with all work on all electric or electronic equipment, make sure that it is unplugged first.

Strumenti

Parti

Thumb screw location Remove the left thumb screw Remove the right thumb screw
  • Thumb screw location

  • Remove the left thumb screw

  • Remove the right thumb screw

Aggiungi Commento

With both thumb screws removed, the front bezel can now be easily pulled off. It is only held in place by three magnets. With the bezel out of the way, there will be a small cover held in place by a crossbar and a thumb screw.  Loosen the thumb screw and fold the bar out of the way. The back of the lamp housing is now visible.
  • With both thumb screws removed, the front bezel can now be easily pulled off. It is only held in place by three magnets.

  • With the bezel out of the way, there will be a small cover held in place by a crossbar and a thumb screw. Loosen the thumb screw and fold the bar out of the way.

  • The back of the lamp housing is now visible.

Aggiungi Commento

Loosen the 3mm Allen bolt. It will not come out of the lamp housing, but will loosen it to remove the lamp housing from the TV. With the Allen bolt loose, pull the lamp houing slightly back and down, this will remove the lamp in its housing.
  • Loosen the 3mm Allen bolt. It will not come out of the lamp housing, but will loosen it to remove the lamp housing from the TV.

  • With the Allen bolt loose, pull the lamp houing slightly back and down,

  • this will remove the lamp in its housing.

Aggiungi Commento

Here is the old lamp and housing. For the replacement, a complete lamp and housing was chosen. The lamp is individually available. There was not a big difference in cost, to justify the additional steps of replacing the lamp housing. Install the new lamp and housing
  • Here is the old lamp and housing.

  • For the replacement, a complete lamp and housing was chosen. The lamp is individually available. There was not a big difference in cost, to justify the additional steps of replacing the lamp housing.

  • Install the new lamp and housing

Aggiungi Commento

Result of this $32 repair is a bright fully functioning TV
  • Result of this $32 repair is a bright fully functioning TV

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

oldturkey03

Membro da: 29/09/2010

516.389 Reputazione

120 Guide realizzate

Team

OTS Membro di OTS

Business

1 Membro

120 Guide realizzate

Where did you purchase this bulb for $32?

Wendy Watson - Replica

Mine worked 4 3 hours then stayed off.

Love machine Guaranteed -

I ordered a replacement housing with new bulb in it and with shipping it was 35. Ordered it thru Sears online and they sent it out next day air. It took five min to swap out

Joker - Replica

Thanks a lot. You saved me money

Alexander Ritchie - Replica

THANK YOU! Helped me save so much money! I did it all by myself!

aliciabball - Replica

looking for a bulb...where is the best price

kenneth thurman - Replica

I had too pay a hundred bucks at bestbuy bad idea I could have done some more research and would have spent a lot less! Oh well it’s done now money’s gone. This had awsome and very easy instructions it was great thanks

Cami - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 13

Ultimi 7 Giorni: 56

Ultimi 30 Giorni: 227

Tutti i Tempi: 17,582