Introduzione

This guide will outline how to disassemble and reattach or replace the Sony FDL-220R Watchman antenna. Steps include basic disassembly of the Sony FDL-220R Watchman, and tools include a Phillips #00 Screwdriver and a Spudger.

Parti

Nessuna parte richiesta.

Press down on the textured area and push towards the bottom of the device. Gently remove the battery cover.
  • Press down on the textured area and push towards the bottom of the device.

  • Gently remove the battery cover.

  • Remove the three AA batteries.

Aggiungi Commento

Locate the five 5x11mm screws surrounding the battery compartment. Remove screws with a Phillips #00 screwdriver.
  • Locate the five 5x11mm screws surrounding the battery compartment.

  • Remove screws with a Phillips #00 screwdriver.

Aggiungi Commento

Grasp the entire back half of the Watchman's casing. Snap off the casing from the bottom of the device.
  • Grasp the entire back half of the Watchman's casing.

  • Snap off the casing from the bottom of the device.

  • Gently pull off entire back casing.

  • Buttons may fall out upon opening casing. See the button replacement guide to fix buttons.

Aggiungi Commento

Locate the two metal tabs which are meant to hold the antenna in place. Pry back the metal tabs with a spudger. Hook the antenna into the metal tab.
  • Locate the two metal tabs which are meant to hold the antenna in place.

  • Pry back the metal tabs with a spudger.

  • Hook the antenna into the metal tab.

  • Ensure that the antenna is fully enclosed in the metal tab.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Sam Putnam

Membro da: 22/10/2014

484 Reputazione

4 Guide realizzate

Team

Baylor, Team 4-5, Williams Fall 2014 Membro di Baylor, Team 4-5, Williams Fall 2014

BU-WILLIAMS-F14S4G5

4 Membri

4 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 205