Introduzione

This guide will help you replace the logic board on your Sony Ericsson Xperia Pro MK16A phone. Follow along and you will have a new logic board installed in about half an hour.

Use a plastic opening tool to get the back cover off your phone. The plastic opener will work on any side, but be careful and pry gently. The plastic opener will work on any side, but be careful and pry gently.
  • Use a plastic opening tool to get the back cover off your phone.

  • The plastic opener will work on any side, but be careful and pry gently.

Aggiungi Commento

Locate the battery in your phone.
  • Locate the battery in your phone.

  • Find the divot below the battery.

  • Use your thumb to lift the battery out of the phone.

Aggiungi Commento

Remove the 4 black screws with the Phillips screwdriver. Remove the 4 silver screws with the Torx screwdriver. Remove the 4 silver screws with the Torx screwdriver.
  • Remove the 4 black screws with the Phillips screwdriver.

  • Remove the 4 silver screws with the Torx screwdriver.

Aggiungi Commento

Insert the plastic opening tool in between the two halves of the case. Pry around the phone to detach the back case.
  • Insert the plastic opening tool in between the two halves of the case. Pry around the phone to detach the back case.

Aggiungi Commento

Remove the last screw that is connecting the logic board using the Phillips screwdriver. Undo the two ribbons. Undo the two ribbons.
  • Remove the last screw that is connecting the logic board using the Phillips screwdriver.

  • Undo the two ribbons.

Aggiungi Commento

Undo that last connector. Undo that last connector. Undo that last connector.
  • Undo that last connector.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Craig

Membro da: 21/10/2014

55 Reputazione

1 Guida realizzata

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 710