Introduzione

Use this guide to help you replace the LCD.

Insert the edge of an opening tool between the front cover and the phone. Gently pry off the front cover working your way around the edges.
  • Insert the edge of an opening tool between the front cover and the phone.

  • Gently pry off the front cover working your way around the edges.

Aggiungi Commento

Pull the front cover down and away from the phone. The front keypads might come off with the front cover.  Do not lose these.
  • Pull the front cover down and away from the phone.

  • The front keypads might come off with the front cover. Do not lose these.

Aggiungi Commento

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Gently peel the keypad away from the phone.
  • Gently peel the keypad away from the phone.

Aggiungi Commento

Insert a spudger between the lower edge of the screen and the phone. Pry the screen up to disconnect the tabs on each side holding the screen in.
  • Insert a spudger between the lower edge of the screen and the phone.

  • Pry the screen up to disconnect the tabs on each side holding the screen in.

  • Do not remove the screen yet. There is a ribbon connecting the screen to the motherboard.

Aggiungi Commento

Use a spudger to remove the ribbon cable from the motherboard. Lift the screen away from the phone
  • Use a spudger to remove the ribbon cable from the motherboard.

  • Lift the screen away from the phone

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Diego

Membro da: 09/10/2011

307 Reputazione

8 Guide realizzate

Team

Cal Poly, Team 5-31, Amido Fall 2011 Membro di Cal Poly, Team 5-31, Amido Fall 2011

CPSU-AMIDO-F11S5G31

4 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 22

Tutti i Tempi: 4,788