Introduzione

In this guide the back housing of the phone will be removed and the camera lens will be removed from the housing.

Parti

Nessuna parte richiesta.

Find the small notch on the side of the phone. The notch is located by the "fast-forward" button and the "lock" switch.
  • Find the small notch on the side of the phone. The notch is located by the "fast-forward" button and the "lock" switch.

Aggiungi Commento

Insert your plastic opening tool into the notch. Pry off the faceplate by gently sliding the plastic opening tool around the phone while still keeping the tool under the edge of the phone. When enough of the faceplate has been lifted it can be easily removed.
  • Insert your plastic opening tool into the notch.

  • Pry off the faceplate by gently sliding the plastic opening tool around the phone while still keeping the tool under the edge of the phone.

  • When enough of the faceplate has been lifted it can be easily removed.

  • In order to replace the faceplate, simply press and snap the faceplate back onto the front of the phone.

Aggiungi Commento

Remove the four 2mm Phillips screws from the back housing of the phone.
  • Remove the four 2mm Phillips screws from the back housing of the phone.

Aggiungi Commento

Insert the plastic opening tool in the notch at the top corner of the phone. Lift the corner and run the plastic opening tool around the phone until the back housing can easily be removed. Lift the corner and run the plastic opening tool around the phone until the back housing can easily be removed.
  • Insert the plastic opening tool in the notch at the top corner of the phone.

  • Lift the corner and run the plastic opening tool around the phone until the back housing can easily be removed.

Aggiungi Commento

Remove the lends by pushing the lens from the inside of the housing. Remove the lends by pushing the lens from the inside of the housing.
  • Remove the lends by pushing the lens from the inside of the housing.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

kgkramer

Membro da: 27/06/2012

121 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 1-5, Regan SU 2012 Membro di Cal Poly, Team 1-5, Regan SU 2012

CPSU-REGAN-SU12S1G5

3 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 974