Introduzione

This guide will teach the user how to disassemble and access the AV port for replacement or installation.

The battery cover is located on the right side of the camera.
  • The battery cover is located on the right side of the camera.

  • Slide the cover to expose the battery.

Aggiungi Commento

Ensure that the battery lines up properly with the slot in the camera.
  • Ensure that the battery lines up properly with the slot in the camera.

  • Slide battery in.

  • Slide cover closed.

  • Battery not shown

Aggiungi Commento

This is the camera without the front cover.
  • This is the camera without the front cover.

Aggiungi Commento

Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.
  • Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.

Aggiungi Commento

Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are. Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.
  • Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.

Aggiungi Commento

Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side. Pull apart the inner hardware from the back case by prying on the left side.
  • Pull apart the inner hardware from the back case by prying on the left side.

Aggiungi Commento

Remove the back cover.
  • Remove the back cover.

Aggiungi Commento

The back cover is now removed from the internal hardware.
  • The back cover is now removed from the internal hardware.

Aggiungi Commento

This is the CCD module.
  • This is the CCD module.

Aggiungi Commento

Use plastic opening tool pop open the two ribbons attaching to the CCD module.
  • Use plastic opening tool pop open the two ribbons attaching to the CCD module.

  • These are the two ribbons.

Aggiungi Commento

Remove CCD module.
  • Remove CCD module.

    • You may have to tug on the ribbons to remove the CCD module.

Aggiungi Commento

The CCD module is now removed from the camera.
  • The CCD module is now removed from the camera.

Aggiungi Commento

These two screws hold in the AV port. Use Phillips screwdriver to remove screws.
  • These two screws hold in the AV port.

  • Use Phillips screwdriver to remove screws.

Aggiungi Commento

Remove metal screw plate.
  • Remove metal screw plate.

Aggiungi Commento

Use pry stick to pop off ribbon.
  • Use pry stick to pop off ribbon.

Aggiungi Commento

Remove AV port from camera.
  • Remove AV port from camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Stephannie Allen

Membro da: 11/03/2013

189 Reputazione

10 Guide realizzate

Team

Clemson, Team 13-1, Benson Spring 2013 Membro di Clemson, Team 13-1, Benson Spring 2013

CLEM-BENSON-S13S13G1

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 353