Salta al contenuto principale

Sony Cyber-shot DSC-S2100 LCD Replacement

Cosa ti serve

  1. Sony Cyber-shot DSC-S2100 LCD Replacement, LCD: passo 1, immagine 1 di 3 Sony Cyber-shot DSC-S2100 LCD Replacement, LCD: passo 1, immagine 2 di 3 Sony Cyber-shot DSC-S2100 LCD Replacement, LCD: passo 1, immagine 3 di 3
    • The broken LCD is immediately visible when the camera is turned on.

    • Remove the batteries and, if so equipped, the memory card.

    • Remove the three Philips screws from the bottom of the camera with a Phillips #00 Screwdriver.

  2. Sony Cyber-shot DSC-S2100 LCD Replacement: passo 2, immagine 1 di 3 Sony Cyber-shot DSC-S2100 LCD Replacement: passo 2, immagine 2 di 3 Sony Cyber-shot DSC-S2100 LCD Replacement: passo 2, immagine 3 di 3
    • Remove the two Philips screws from the right side of the camera.

    • Remove the two Philips screws from the left side of the camera.

    • Split the housing by either using a plastic opening tool, or your finger nails. No excessive force is necessary. For ease of accomplishment, start at the battery compartment.

  3. Sony Cyber-shot DSC-S2100 LCD Replacement: passo 3, immagine 1 di 3 Sony Cyber-shot DSC-S2100 LCD Replacement: passo 3, immagine 2 di 3 Sony Cyber-shot DSC-S2100 LCD Replacement: passo 3, immagine 3 di 3
    • Once the rear case has been removed, the LCD and frame are easily identified.

    • Fold the LCD to the right, away from the frame.

    • Do not try to remove the LCD yet since the ribbon cable is still connected.

    • Remove the three Philips screws from the LCD frame.

  4. Sony Cyber-shot DSC-S2100 LCD Replacement: passo 4, immagine 1 di 3 Sony Cyber-shot DSC-S2100 LCD Replacement: passo 4, immagine 2 di 3 Sony Cyber-shot DSC-S2100 LCD Replacement: passo 4, immagine 3 di 3
    • When the LCD frame is removed, the ribbon cable becomes clearly visible.

    • Flip the LCD to its left side. Open the clip of the connector by moving the black lock to the right.

    • Remove the LCD

  5. Sony Cyber-shot DSC-S2100 LCD Replacement: passo 5, immagine 1 di 1
    • Ensure the screen displayed greets you, once you reassembled your camera

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

oldturkey03

Membro da: 09/29/10

778.207 Reputazione

118 Guide realizzate

Team

Global Fixers Membro di Global Fixers

Community

31 Membri

520 Guide realizzate

2 Commenti

你在哪里?把相机给你帮我挨可以吗

Jeanne - Replica

请问你是在多伦多附近吗?

Jeanne - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 38

Tutti i Tempi: 2,421