Aggiusta la tua roba Comunità Store

Sony Cyber-shot DSC-P9 Motherboard Replacement

Cosa ti serve

  1. Sony Cyber-shot DSC-P9 Motherboard Replacement, Battery: passo 1, immagine 1 di 1

    • Slide the battery latch down the side of the camera with your hands.

    • The latch will automatically pop open.

    Traduci

  2. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 2, immagine 1 di 1

    • Unlatch the clip over the battery.

    • The battery will partially pop out.

    Traduci

  3. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 3, immagine 1 di 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 3, immagine 2 di 2

    • Remove the battery from the camera.

    Traduci

  4. Sony Cyber-shot DSC-P9 Motherboard Replacement, Outer Casing: passo 4, immagine 1 di 2 Sony Cyber-shot DSC-P9 Motherboard Replacement, Outer Casing: passo 4, immagine 2 di 2

    • Remove the four 3.0mm Phillips #000 screws on the top of the camera with the phillips screwdriver.

    • Remove the additional four 3.0mm Phillips #000 screws on the bottom of the camera.

    Traduci

  5. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 5, immagine 1 di 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 5, immagine 2 di 2

    • Once the screws are removed, slowly remove the back casing from the rest of the camera.

    Traduci

  6. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 6, immagine 1 di 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 6, immagine 2 di 2

    • Then, pull the front case away from the rest of the camera.

    Traduci

  7. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 7, immagine 1 di 1

    • After the casing is removed, the camera should look as shown.

    Traduci

  8. Sony Cyber-shot DSC-P9 Motherboard Replacement, Lens: passo 8, immagine 1 di 2 Sony Cyber-shot DSC-P9 Motherboard Replacement, Lens: passo 8, immagine 2 di 2

    • Dislodge the round casing from the lens.

    • Pull it away from the rest of the camera.

    Traduci

  10. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 9, immagine 1 di 1

    • Unscrew the two 4.0mm Phillips #000 screws from the display.

    Traduci

  11. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 10, immagine 1 di 1

    • Pull the two ribbon cables out of their slots on the back circuit board.

    Traduci

  12. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 11, immagine 1 di 1

    • Remove the three 4.0mm Phillips #000 screws holding the back panel in place.

    Traduci

  13. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 12, immagine 1 di 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 12, immagine 2 di 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 12, immagine 3 di 3

    • Work the back panel out from under the small grey clip.

    • Slide the back panel off of the camera by dislodging it from the remaining clips.

    • Below is a flat, orange cable connecting the lens to the motherboard.

    • Be careful not to bend the back plate during this process.

    Traduci

  14. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 13, immagine 1 di 1

    • Turn the camera over so that you can see the front of the lens.

    • Two connectors link the lens to the motherboard.

    • Gently bring the lens away from the camera.

    Traduci

  15. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 14, immagine 1 di 1

    • Using the flat end of the plastic spudger tool, flip up the black tabs on the connectors.

    • Be careful not to exert too much force, as the connectors are delicate.

    Traduci

  16. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 15, immagine 1 di 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 15, immagine 2 di 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 15, immagine 3 di 3

    • Gently pull out the cables and move the lens away from the rest of the camera.

    • You should now have two distinct, separate components.

    Traduci

  17. Sony Cyber-shot DSC-P9 Motherboard Replacement, Motherboard: passo 16, immagine 1 di 2 Sony Cyber-shot DSC-P9 Motherboard Replacement, Motherboard: passo 16, immagine 2 di 2

    • Rotate the bottom panel upwards and pull away with your hand.

    Traduci

  18. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 17, immagine 1 di 1

    • Remove the one 2.5mm Phillips #000 screw on the bottom corner of the motherboard.

    Traduci

  19. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 18, immagine 1 di 1

    • Lift the black tab holding the top-left ribbon cable in place with the spudger tool.

    • Remove the ribbon cable with the spudger by carefully pulling the cable directly out of the slot.

    • Take care not to rip the ribbon cable when pulling it out.

    Traduci

  20. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 19, immagine 1 di 1

    • Lift the black tab that locks the orange ribbon cable in place.

    • Remove the ribbon cable by gently pulling it out of the slot with the spudger.

    • Take care not to rip the ribbon cable when pulling it out, and be mindful of a second cable beneath the first.

    Traduci

  21. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 20, immagine 1 di 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 20, immagine 2 di 2

    • Remove the second ribbon cable below the first one by gently pulling it out of the slot with the spudger.

    • Take care not to rip the ribbon cable when pulling it out.

    Traduci

  22. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 21, immagine 1 di 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 21, immagine 2 di 2

    • Remove the ribbon cable to the right of the bottom two ribbon cables with the spudger.

    • Take care not to rip the ribbon cable when pulling it out.

    Traduci

  23. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 22, immagine 1 di 2 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 22, immagine 2 di 2

    • Pull the motherboard out of the slot on the side of the camera where the lens used to be attached.

    Traduci

  24. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 23, immagine 1 di 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 23, immagine 2 di 3 Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 23, immagine 3 di 3

    • Lift the motherboard away from the camera.

    • Detach the final ribbon cable connecting the motherboard to the rest of the camera.

    • Take care not to rip the ribbon cable when pulling it out.

    Traduci

  25. Sony Cyber-shot DSC-P9 Motherboard Replacement: passo 24, immagine 1 di 1

    • The motherboard should now be fully disconnected from the rest of the camera.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Robert Potter

Membro da: 04/10/12

41 Reputazione

1 Guida realizzata

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 17-25, Amido Spring 2012 Membro di Cal Poly, Team 17-25, Amido Spring 2012

CPSU-AMIDO-S12S17G25

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 1,220