Parti

Nessuna parte richiesta.

Slide the battery latch down the side of the camera with your hands.
  • Slide the battery latch down the side of the camera with your hands.

  • The latch will automatically pop open.

Aggiungi Commento

Unlatch the clip over the battery.
  • Unlatch the clip over the battery.

  • The battery will partially pop out.

Aggiungi Commento

Remove the battery from the camera. Remove the battery from the camera.
  • Remove the battery from the camera.

Aggiungi Commento

Unscrew the four 3.0mm Phillips #000 screws holding the back case onto the camera; there are two screws on top and two on the bottom.
  • Unscrew the four 3.0mm Phillips #000 screws holding the back case onto the camera; there are two screws on top and two on the bottom.

Aggiungi Commento

Pull the back case gently away from the rest of the camera. Pull the back case gently away from the rest of the camera.
  • Pull the back case gently away from the rest of the camera.

Aggiungi Commento

Remove the two 3.0mm Phillips #000 screws holding the display to the metal backing.
  • Remove the two 3.0mm Phillips #000 screws holding the display to the metal backing.

Aggiungi Commento

Unlatch the display by sliding it towards the circuit board. Unlatch the display by sliding it towards the circuit board.
  • Unlatch the display by sliding it towards the circuit board.

Aggiungi Commento

Remove the two ribbon cables attached to the circuit board by gently pulling them out of their slots.
  • Remove the two ribbon cables attached to the circuit board by gently pulling them out of their slots.

  • Be careful not to rip the ribbon cables while disconnecting them.

Aggiungi Commento

The LCD is now separated from the camera.
  • The LCD is now separated from the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jenna Crawford

Membro da: 09/04/2012

29 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 17-25, Amido Spring 2012 Membro di Cal Poly, Team 17-25, Amido Spring 2012

CPSU-AMIDO-S12S17G25

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 729