Introduzione

This is a step by step guide to uninstalling the front casing of the camera.

Parti

Nessuna parte richiesta.

First locate the appropriate screws for detachment. First locate the appropriate screws for detachment. First locate the appropriate screws for detachment.
  • First locate the appropriate screws for detachment.

Aggiungi Commento

Remove the five screws shown using a Phillips #00 Screwdriver.
  • Remove the five screws shown using a Phillips #00 Screwdriver.

  • It is important to put the small screws in a safe location in order to reassemble the casing.

Aggiungi Commento

Using a spudger, carefully pry open the front casing.
  • Using a spudger, carefully pry open the front casing.

Aggiungi Commento

Carefully separate the front casing from the camera body. CAUTION: Be careful not to break the wire connecting the front casing and the camera.
  • Carefully separate the front casing from the camera body.

  • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Katie McCraw

Membro da: 09/03/2012

191 Reputazione

7 Guide realizzate

Team

Clemson, Team 1-5, Benson Spring 2012 Membro di Clemson, Team 1-5, Benson Spring 2012

CLEM-BENSON-S12S1G5

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,081