Introduzione

The Sony Clie PEG-UX50 has a separate tilt screen mechanism that does not require the user to dismantle the battery plate in order to get to the display .

Parti

Nessuna parte richiesta.

Take off the screws located on the 2 sides of the tilt screen. Unscrew the screw located at the tilt base of the screen Unscrew the screw located at the tilt base of the screen
  • Take off the screws located on the 2 sides of the tilt screen.

  • Unscrew the screw located at the tilt base of the screen

Aggiungi Commento

Gently remove back plate of tilt screen by sliding upward. With caution, lift wires from the track in the back plate With caution, lift wires from the track in the back plate
  • Gently remove back plate of tilt screen by sliding upward.

  • With caution, lift wires from the track in the back plate

Aggiungi Commento

Disconnect the thin bus cable attached to the Integrated Circuit Disconnect the thin bus cable attached to the Integrated Circuit
  • Disconnect the thin bus cable attached to the Integrated Circuit

Aggiungi Commento

Detach the plastic black frame from in between the plate and lcd. Do not disconnect the display from the board yet.
  • Detach the plastic black frame from in between the plate and lcd.

  • Do not disconnect the display from the board yet.

Aggiungi Commento

Disconnect the thin connector from the face plate using the tweezer
  • Disconnect the thin connector from the face plate using the tweezer

Aggiungi Commento

With your hands, quick-release and disconnect the thick cable
  • With your hands, quick-release and disconnect the thick cable

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Rishad R Rai

Membro da: 28/04/2011

1 Reputazione

1 Guida realizzata

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 4

Tutti i Tempi: 2,182