Introduzione

This guide will demonstrate how to disconnect the antenna from the radio.

Parti

Nessuna parte richiesta.

Place the Phillips #2 screwdriver in the Phillips screw at the base of the antenna connection.
  • Place the Phillips #2 screwdriver in the Phillips screw at the base of the antenna connection.

  • Loosen and remove the 8 mm screw using the #2 Phillips screw driver.

Aggiungi Commento

Straighten the antenna to a vertical position and pull straight up (with a little force!) to remove the antenna. Straighten the antenna to a vertical position and pull straight up (with a little force!) to remove the antenna. Straighten the antenna to a vertical position and pull straight up (with a little force!) to remove the antenna.
  • Straighten the antenna to a vertical position and pull straight up (with a little force!) to remove the antenna.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 11

Tutti i Tempi: 690