Introduzione
If you find your waterproof case not as watertight as you had hoped, you might want to replace the O-ring. You will need a tool to pry the O-ring from the case.
Cosa ti serve
-
-
To open the case, push the yellow "Open" tab located at the bottom of the case.
-
Pull out on the yellow tabs as indicated by the circles in the photo to unlock the lid. This may be a little tricky!
-
Then, remove the lid.
-
-
-
-
Take the plastic opening tool and wedge it between the O-ring and the groove.
-
Then, pry the O-ring until it is out of the groove.
-
-
-
Now that the O-ring is out of the groove, remove the O-ring from the lid.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 1-2, Sullivan Winter 2015 Membro di USF Tampa, Team 1-2, Sullivan Winter 2015
USFT-SULLIVAN-W15S1G2
4 Membri
12 Guide realizzate
