Introduzione

To take the key board out for replacement.

Parti

Nessuna parte richiesta.

Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.
  • Use the plastic opening tool to remove the 4 buttons on each corner of the Sidekick.

  • Gently pry open button and remove button.

  • Do this for each of the 3 buttons remaining.

Aggiungi Commento

The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off. The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.
  • The bumpers on the top and bottom of the phone can be removed by simply "peeling" them off.

Aggiungi Commento

Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.
  • Use the Phillips head screwdriver to remove the 4 screws that are underneath the 4 buttons you removed in step one.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.
  • Flip the screen up halfway (90 degrees), to reveal the 2 screws above the right side of the keyboard.

  • Use the Torx 6 screwdriver to remove these 2 screws.

  • Be careful in handling the phone after removing the screws, because the two main bodies of the phone are no longer attached.

Aggiungi Commento

After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.
  • After removing the 6 screws and both bumpers, the phone will be easy to separate into the two main bodies.

  • You can use your hands to simply pull apart the top casing from the bottom casing.

Aggiungi Commento

Remove screen from case Remove screen from case
  • Remove screen from case

Aggiungi Commento

Remove both black "rivets" from the back of the case with the plastic opening tool.
  • Remove both black "rivets" from the back of the case with the plastic opening tool.

Aggiungi Commento

Push keyboard out of the front of the casing with your thumbs.
  • Push keyboard out of the front of the casing with your thumbs.

  • Make sure not to press too hard; you may break the board.

Aggiungi Commento

Linea Traguardo

michael albaum

Membro da: 20/01/2010

45 Reputazione

11 Guide realizzate

Team

Cal Poly, Team 3-19, Maness Winter 2010 Membro di Cal Poly, Team 3-19, Maness Winter 2010

CPSU-MANESS-W10S3G19

4 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,758