Parti

Nessuna parte richiesta.

Before disassembling the device, make sure it is powered off.
  • Before disassembling the device, make sure it is powered off.

  • Remove the four 1.5mm screws on the back of the device.

Aggiungi Commento

Using a plastic opening tool, lift the metal backing from the front of the device.
  • Using a plastic opening tool, lift the metal backing from the front of the device.

Aggiungi Commento

Pull the rear panel off of the Sansa e260R.
  • Pull the rear panel off of the Sansa e260R.

Aggiungi Commento

Grip the bottom of the battery with your thumb and forefinger and pull it away from the device.
  • Grip the bottom of the battery with your thumb and forefinger and pull it away from the device.

Aggiungi Commento

Remove the four 1.5mm screws on the inner casing of the device.
  • Remove the four 1.5mm screws on the inner casing of the device.

  • These screws are very small and hard to extract from the casing. It may be helpful to use a magnetic screwdriver.

Aggiungi Commento

Flip the device so that the front is facing you.
  • Flip the device so that the front is facing you.

  • Slide a plastic opening tool between the plastic front cover and the metal back cover of the device.

Aggiungi Commento

Pull the front cover away from the rest of the device. Pull the front cover away from the rest of the device.
  • Pull the front cover away from the rest of the device.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Casey Smith

Membro da: 20/01/2012

84 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 8-15, Maness Winter 2012 Membro di Cal Poly, Team 8-15, Maness Winter 2012

CPSU-MANESS-W12S8G15

5 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,711