Parti

Nessuna parte richiesta.

Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.
  • Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.

  • To ensure you don't lose any tiny parts during the replacement process, place parts on the white magnetic sheet.

  • Once the screws have been removed, proceed to take off back cover.

Aggiungi Commento

Now, proceed to lift the battery out and remove it.
  • Now, proceed to lift the battery out and remove it.

Aggiungi Commento

Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing. Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing.
  • Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing.

Aggiungi Commento

Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover. Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover.
  • Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover.

Aggiungi Commento

Gently separate the mainboard from the battery housing. This may be difficult around the headphone jack. Use a spudger if necessary. Pull the motherboard out and down away from the top of the phone.
  • Gently separate the mainboard from the battery housing. This may be difficult around the headphone jack. Use a spudger if necessary.

  • Pull the motherboard out and down away from the top of the phone.

Aggiungi Commento

Peel off the small foam rectangle on the back of the mainboard and set to the side.
  • Peel off the small foam rectangle on the back of the mainboard and set to the side.

  • Peel off the black tape and set off to the side.

Aggiungi Commento

Gently pry up the memory chip and replace it with the new one.
  • Gently pry up the memory chip and replace it with the new one.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Lauren

Membro da: 13/02/2014

43 Reputazione

2 Guide realizzate

Team

Ohio State, Team 1-4, Buehl Spring 2014 Membro di Ohio State, Team 1-4, Buehl Spring 2014

OSU-BUEHL-S14S1G4

3 Membri

3 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 552