Introduzione

This guide will help the user to unscrew device to replace different parts of the camera using ph000 screw driver.

The first thing to do will be unscrew all the screws using Phillips #000 Screwdriver. Keep all the screws in order. Black screws goes under the bottom of camera, and the silver screws goes on the sides and inside of the camera. Keep all the screws in order. Black screws goes under the bottom of camera, and the silver screws goes on the sides and inside of the camera.
  • The first thing to do will be unscrew all the screws using Phillips #000 Screwdriver.

  • Keep all the screws in order. Black screws goes under the bottom of camera, and the silver screws goes on the sides and inside of the camera.

Aggiungi Commento

Using the spudger, and plastic opening tool open the casing of camera. Using the spudger, and plastic opening tool open the casing of camera.
  • Using the spudger, and plastic opening tool open the casing of camera.

Aggiungi Commento

Once you open the camera case, you will be able to work on any part of the camera. Once you open the camera case, you will be able to work on any part of the camera. Once you open the camera case, you will be able to work on any part of the camera.
  • Once you open the camera case, you will be able to work on any part of the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Sarmad Khan

Membro da: 09/01/2015

501 Reputazione

5 Guide realizzate

Team

USF Tampa, Team 1-6, Tanski Winter 2015 Membro di USF Tampa, Team 1-6, Tanski Winter 2015

USFT-TANSKI-W15S1G6

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 281