Introduzione

Breaking down the phone to replace the LCD screen.

Flip open the phone, remove the two rubber covers under the LCD screen.
  • Flip open the phone, remove the two rubber covers under the LCD screen.

  • Remove the two screws using a small Philips screwdriver.

Aggiungi Commento

Using a plastic opening tool, pry open the back cover of the LCD screen.
  • Using a plastic opening tool, pry open the back cover of the LCD screen.

  • Note: Some force may be required.

Aggiungi Commento

Completely separate the back cover from the rest of the phone.
  • Completely separate the back cover from the rest of the phone.

  • Close the phone.

Aggiungi Commento

The LCD screen is big, rectangular screen in the center of the logic board.
  • The LCD screen is big, rectangular screen in the center of the logic board.

Aggiungi Commento

Remove the glue and black tape that is attached to the LCD screen
  • Remove the glue and black tape that is attached to the LCD screen

Aggiungi Commento

Remove Broken LCD Screen.
  • Remove Broken LCD Screen.

Aggiungi Commento

Attach the New LCD Screen, with wire point up and out to the black connector.
  • Attach the New LCD Screen, with wire point up and out to the black connector.

  • Note: Super Glue may be required to permanently attach LCD to the black connector

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Derek Panger

Membro da: 16/04/2010

21 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 18-100, Johann Spring 2010 Membro di Cal Poly, Team 18-100, Johann Spring 2010

CPSU-JOHANN-S10S18G100

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 2,307