Introduzione

This is an easy DIY guide to replace the speaker. It involves removing the back cover, battery, and plastic cover over the motherboard. You will only need a screwdriver for this guide.

Parti

Nessuna parte richiesta.

Remove back cover by pressing down with your thumb on top of the back cover.
  • Remove back cover by pressing down with your thumb on top of the back cover.

Aggiungi Commento

You will hear a popping noise as the cover releases from the phone.  Continue to slide the cover down.
  • You will hear a popping noise as the cover releases from the phone. Continue to slide the cover down.

Aggiungi Commento

Lift the cover off the phone and put aside
  • Lift the cover off the phone and put aside

Aggiungi Commento

Remove the back lid of the cell phone.
  • Remove the back lid of the cell phone.

Aggiungi Commento

Place your thumb on the edge to lift the battery.
  • Place your thumb on the edge to lift the battery.

Aggiungi Commento

Remove the battery.
  • Remove the battery.

Aggiungi Commento

Once the battery is removed, use the Phillips #00 screwdriver to unscrew the 4 3/16" screws holding the black plastic cover in place.
  • Once the battery is removed, use the Phillips #00 screwdriver to unscrew the 4 3/16" screws holding the black plastic cover in place.

Aggiungi Commento

Remove the headphone cover from the left side and the volume cover from the right side of the black plastic cover. Remove the headphone cover from the left side and the volume cover from the right side of the black plastic cover.
  • Remove the headphone cover from the left side and the volume cover from the right side of the black plastic cover.

Aggiungi Commento

Remove the black plastic cover from the back of the phone.  This may take a little effort.
  • Remove the black plastic cover from the back of the phone. This may take a little effort.

Aggiungi Commento

The speaker is located on the opposite side of the black plastic cover.  Using your fingernail, pry the speaker out of the cover.
  • The speaker is located on the opposite side of the black plastic cover. Using your fingernail, pry the speaker out of the cover.

Aggiungi Commento

Replace with a new speaker.
  • Replace with a new speaker.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Susan

Membro da: 11/07/2013

301 Reputazione

3 Guide realizzate

Team

WRI115, Team 1-4, Ruszkiewicz Spring 2013 Membro di WRI115, Team 1-4, Ruszkiewicz Spring 2013

WRI115-RUSZKIEWICZ-S13S1G4

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 88